| 16441 | 25 Apr 2020 | Other | For mechanical people one beg stand is ready. | Other | OTHERS | |
| 16442 | 25 Apr 2020 | Other | Old Dg set cable disconnected and shifted near workshop 25 square mm 40 mtr cable connected with panel board. | Other | OTHERS | |
| 16443 | 25 Apr 2020 | Breakdown Maintenance | RMHS video feeder no 12
It's not working. than we find out the problem is it's coil internally short. So we change it by new one. | Other | OTHERS | |
| 16444 | 25 Apr 2020 | Scheduled Maintenance | Tapping section crane no 1 and 2
It is connected with bus bar line and tested now it's running with bus bar. | Other | OTHERS | |
| 16445 | 24 Apr 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1,2,3 & SEAL COOLING BLOWER 1, HYDRAULIC POWER PACK, TRANSFORMER
1. checked motor condition.no noise coming from it.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked transformer temp. and oil level. it is ok.
5. checked solenoid valves. it is ok.
F2- ELECTRODE BLOWER 1,2,3 & SEAL COOLING BLOWER 1, HYDRAULIC POWER PACK, TRANSFORMER
1. checked motor condition.no noise coming from it.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked transformer temp. and oil level. it is ok.
5. checked solenoid valves. it is ok.
| Other | OTHERS | |
| 16446 | 24 Apr 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1,2,3 & SEAL COOLING BLOWER 1, HYDRAULIC POWER PACK, WATER MANIFOLD
1. checking loose parts and check the hydraulic oil level in the tank.it is ok.
2. check solenoid valve working conditions and adjust oil pressure.it is ok.
3. by air clean all dust from the cylinders.
4. check the water manifold line and check the T section of pipes. water manifold lines some T and valves condition is not good. we inform this.
5. checked the Transformer heat exchanger. no leakage.
F2- ELECTRODE BLOWER 1,2,3 & SEAL COOLING BLOWER 1, HYDRAULIC POWER PACK, WATER MANIFOLD
1. checking loose parts and check the hydraulic oil level in the tank.it is ok.
2. check solenoid valve working conditions and adjust oil pressure.it is ok.
3. by air clean all dust from the cylinders.
4. check the water manifold line and check the T section of pipes. it is ok.
5. checked the Transformer heat exchanger. no leakage.
| Other | OTHERS | |
| 16447 | 24 Apr 2020 | Breakdown Maintenance | Shipping yard new carne
Its damage chain speler system of L.T section is removed and we mount one Belt pully system for L.T. TRAVEL.now its ok. | Other | OTHERS | |
| 16448 | 24 Apr 2020 | Breakdown Maintenance | Automotive maintenanc
Of JCB
Its arms bucket is damaged so we cut one damaged part and weld one ms plate with teeth. | Other | OTHERS | |
| 16449 | 24 Apr 2020 | Breakdown Maintenance | Automotive maintenance
Of TAFE TRACTOR
It's hydraulic line pipe is lekaged. So we repaired it now it's ok. | Other | OTHERS | |
| 16450 | 24 Apr 2020 | Other | for Mansa
crusher star delta starter one MCCB fitted inside the panel box. | Other | OTHERS | |
 white.png){kind=small}