Maintenance Report

Search Filter:

Showing 16,411-16,420 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1641130 Apr 2020Scheduled MaintenanceTELPHER FOR F2
1.check motor condition. it is ok.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
OtherTELPHER ( FURNACE 2)
1641230 Apr 2020Scheduled MaintenancePOLLUTION ID FANS FOR F1
1.checked motor condition ( amp, volt, and connectivity).
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
OtherPOLLUTION 1
1641330 Apr 2020Scheduled MaintenancePOLLUTION ID FANS FOR F2
1.checked motor condition ( amp, volt, and connectivity).no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
OtherPOLLUTION 2
1641429 Apr 2020Breakdown MaintenanceStarter repair carbon brash 2 nos. New fitting.OtherJCB 4DX
1641529 Apr 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. checked coupling, shaft, and pedestal bearing condition greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition. it is ok.

CT.
1. checked coupling, shaft, and pedestal bearing condition. greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition and greasing is done.

HT.
1. checked rope drum, hook, rope condition.it is ok.
2. checked the thruster drum condition and its brake tightness.
3. checked all fasteners and mounting bolts. It is ok.
4. checked frame welding conditions.it ios ok.		OtherTAPPING SEC. CRANE NO. 1
1641629 Apr 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.

CT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.

HT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.		OtherTAPPING SEC. CRANE NO. 1
1641729 Apr 2020Scheduled MaintenanceLT.
1. checked coupling, shaft, and pedestal bearing condition greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition. it is ok.

CT.
1. checked coupling, shaft, and pedestal bearing condition. greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition and greasing is done.
6. one bearing of CT trolly wheel is damaged. so change it. bearing no is P209

HT.
1. checked rope drum, hook, rope condition.it is ok.
2. checked the thruster drum condition and its brake tightness.
3. checked all fasteners and mounting bolts. It is ok.
4. checked frame welding conditions.it ios ok.		OtherTAPPING SEC. CRANE NO. 2
1641829 Apr 2020Scheduled MaintenanceLT.
1. checked coupling, shaft, and pedestal bearing condition greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition. it is ok.

CT.
1. checked coupling, shaft, and pedestal bearing condition. greasing is done.
2. checked the gearbox oil level. no leakage.
3. checked all fasteners and mounting bolts.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition and greasing is done.

HT.
1. checked rope drum, hook, rope condition.it is ok.
2. checked the thruster drum condition and its brake tightness.
3. checked all fasteners and mounting bolts. It is ok.
4. checked frame welding conditions.it ios ok.
5. its gearbox making noise so we inform it to HOD.		OtherTAPPING SEC. CRANE NO. 3
1641929 Apr 2020Breakdown Maintenanceits one pedestal bearing is damaged. so we change it.OtherCONVEYOR 2 ( WASHING PLANT)
1642029 Apr 2020Scheduled MaintenanceLT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.

CT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.

HT.
1. motor condition is good. ( amp, volt, and connectivity). no noise coming.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. checked limit switches and its condition.		OtherTAPPING SEC. CRANE NO. 2