| 16311 | 08 May 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank. IT IS OK.
2. check solenoid valve working conditions and adjust oil pressure. IT IS OK.
3. check hydraulic line leakage. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 16312 | 08 May 2020 | Scheduled Maintenance | 1. check the water manifold line, T section, and valves. SOME T SECTION AND DUMMIES ARE NOT GOOD. WE INFORM IT TO HOD.
2. check leakage of hose pipes. no leakage found. | Furnace I | WATER MAINEFOLD | |
| 16313 | 08 May 2020 | Scheduled Maintenance | . check the water manifold line, T section, and valves. SOME T SECTION AND DUMMIES ARE NOT GOOD. WE INFORM IT TO HOD.
2. check leakage of hose pipes. no leakage found. | Furnace II | WATER MAINEFOLD | |
| 16314 | 08 May 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean cylinders but dust and heavy partials are too much. after some time its fill will dust.
2. check leakage of hydraulic oil. one clamping cylinder has a small amount of leakage. we inform it to HOD. | Furnace I | ELECTRODE 2 | |
| 16315 | 08 May 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean cylinders but dust and heavy partials are too much. after some time its fill will dust.
2. check leakage of hydraulic oil. NO LEAKAGE. | Furnace I | ELECTRODE 3 | |
| 16316 | 08 May 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean cylinders but dust and heavy partials are too much. after some time its fill will dust.
2. check leakage of hydraulic oil.NO LEAKAGE. | Furnace I | ELECTRODE 1 | |
| 16317 | 08 May 2020 | Breakdown Maintenance | Lab hot plate is not working.heater coil is damaged so we change it by spare one. | Other | LAB EQUIPMENT | |
| 16318 | 08 May 2020 | Breakdown Maintenance | Washing plant lump outlet pipe is damaged so we change it. Now it is ok. | Other | PUMP | |
| 16319 | 08 May 2020 | Breakdown Maintenance | It's indicator switch not working so we change it. Now it's ok. | Other | TAPPING SEC. CRANE NO. 3 | |
| 16320 | 08 May 2020 | Breakdown Maintenance | It's current collector is coming out. It's base bolt tight and cable also tight. Now it's working. | Other | CHIPPING YARD CRANE NO. 2 | |
 white.png){kind=small}