Maintenance Report

Search Filter:

Showing 16,301-16,310 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1630108 May 2020Scheduled MaintenanceELECTRODE BLOWER 2

1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
Furnace IIELECTRODE 2
1630208 May 2020Scheduled Maintenance ELECTRODE BLOWER 3

1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
Furnace IIELECTRODE 3
1630308 May 2020Scheduled MaintenanceFURNACE 2
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.		Furnace IIHYDRAULIC POWER PACK NO. 1
1630408 May 2020Scheduled MaintenanceFURNACE 2

1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1630508 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1630608 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1630708 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IFURNACE 1 TRANSFORMER
1630808 May 2020Scheduled Maintenance1.checked solenoid valve condition and its pipe condition.it is ok.
2.checked pneumatic cylinders and air supply line.it is ok.
3. some charging chute hole passage is narrow. so some big stones are stuck in the chute pipeline.we inform it to HOD.		Furnace ICHARGING CHUTES
1630908 May 2020Scheduled Maintenance1.checked solenoid valve condition and its pipe condition.it is ok.
2.checked pneumatic cylinders and air supply line.it is ok.
3. some charging chute hole passage is narrow. so some big stones are stuck in the chute pipeline. we inform it to HOD.		Furnace IICHARGING CHUTES
1631008 May 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. IT IS OK.
2. check solenoid valve working conditions and adjust oil pressure. IT IS OK.
3. check hydraulic line leakage. ELECTRODE 1 HAS SMALL AMOUNT OF LEAKAGE.		Furnace IHYDRAULIC POWER PACK NO. 1