| 16291 | 08 May 2020 | Scheduled Maintenance | 3RD FLOOR CARBON PASTE LIFTING CRANE
LT, C.T, AND H.T.
1. checked the motor condition ( amp, volt, and connectivity). no noise coming. it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
| Other | CARBON PASTE LIFTING CRANE | |
| 16292 | 08 May 2020 | Scheduled Maintenance | TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.IT IS OK.
2. checking frames welding condition.IT IS OK.
3. checking cotter pin and its failure condition.IT IS OK.
| Other | TELPHER (FURNACE 1) | |
| 16293 | 08 May 2020 | Scheduled Maintenance | POLLUTION ID FANS (Furnace 1)
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation. IT IS OK. WE TIGHTS NUTS AND BOLTS OF PLUMMER BLOCKS. It's MAKING SOME VIBRATIONS WE INFORME IT TO HOD.
3. checked v belts condition and inform if its on critical stage. IT IS OK.
4. checked foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks is done.
6. checked the duct condition and remove dust from the duct. it is ok.
7. check stack condition and check its temperature. it is ok.
| Other | POLLUTION 1 | |
| 16294 | 08 May 2020 | Scheduled Maintenance | POLLUTION ID FANS FOR (Furnace 2)
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation. IT IS OK. WE TIGHTS NUTS AND BOLTS OF PLUMMER BLOCKS. It's MAKING SOME VIBRATIONS WE INFORME IT TO HOD.
3. checked v belts condition and inform if its on critical stage. IT IS OK.
4. checked foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks is done.
6. checked the duct condition and remove dust from the duct. it is ok.
7. check stack condition and check its temperature. it is ok. | Other | POLLUTION 2 | |
| 16295 | 08 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 1 | |
| 16296 | 08 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 2
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 2 | |
| 16297 | 08 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 3
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 3 | |
| 16298 | 08 May 2020 | Scheduled Maintenance | FURNACE 1
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.
| Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 16299 | 08 May 2020 | Scheduled Maintenance | FURNACE 1
1. checked motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.
| Furnace I | HYDRAULIC POWER PACK NO. 2 | |
| 16300 | 08 May 2020 | Scheduled Maintenance | ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. checked the motor condition ( amp, volt, and connectivity).its ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
| Furnace II | ELECTRODE 1 | |
 white.png){kind=small}