| 16201 | 18 May 2020 | Breakdown Maintenance | Furnace floor cooling fan not working. It is repaired now it's ok. | Furnace I | COOLING FAN | |
| 16202 | 18 May 2020 | Other | For mansa
7.5 hp motor arrangement is done.motor fan cover terminal box checking and fixing is done. | Other | BLUE OCEAN | |
| 16203 | 18 May 2020 | Other | For mansa
7.5 hp pump assembly is done. and for that flanges making is done. | Other | BLUE OCEAN | |
| 16204 | 16 May 2020 | Scheduled Maintenance | TILTING HOPPER
1. greasing all bushes.it is done.
2.hydraulic pump and motor coupling. It is ok.
3. checking the hydraulic oil level and if not then fill. It is ok.
4. check hopper welding sections. It is ok.
CONVEYOR NO 1
1. greasing of bearings.it is done.
2. lubrication of rollers and check conditions. It is ok.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.it is ok.
4. gearbox oil level check and if not then fill as per requirement. We fill some grease.
5. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok.
6. check the drum condition.it is ok.
7. check mounting frame welding condition.it is ok.
8. check rollers condition and if not good then change.some rockers are not good but it is ok.
CRUSHER
1. check the crusher foundation.
2. check V belts condition.
3. do greasing.
4. check spring rod condition and gap between plates.
Crusher is out due to small size of materials.
VIBRATOR
1. check the spring condition. It is ok.
2. check V belts condition.it is ok.
3. check vibrations if not good then adjust.it is ok.
4. check the frame welding condition.it is ok.bearing are in good condition.
ROLLER
1. check roller speed. It is ok.
2.greasing of bearings. It is done.
3.gearbox oil level check and if not then fill as per requirement. It is ok. We fill some amount of grease.
4. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok.
5. check the drum condition. It is ok.
6. check the mounting frame welding condition.it is ok.
DISCHARGE CONVEYOR
1. greasing of bearings. It is done.
2. lubrication of rollers and check conditions. It is ok. All rollers are in good condition.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.it is ok
4. gearbox oil level check and if not then fill as per requirement.it is ok. We fill some amount of grease.
5. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok. Greasing is done.
6. check the drum condition. We fit one P210 bearing.
7. check mounting frame welding condition.it is ok.
8. check rollers condition and if not good then change. It is OK . | Other | WASHING PLANT | |
| 16205 | 16 May 2020 | Scheduled Maintenance | WASHING PLANT TILTING HOPPER, CONVEYOR NO 1, CRUSHER, VIBRATOR, ROLLER, DISCHARGE CONVEYOR , WATER PUMP
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. All motors checked .It's in good condition.
2. check panel board, clean, & tight all loose parts.its clean and loose parts tight.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly. It is ok. Mechanical people weld it's foundation.
5. check the high mast lights also.it is ok. | Other | WASHING PLANT | |
| 16206 | 16 May 2020 | Breakdown Maintenance | New battery fitting is done.
Loder not starting we found the problem is battery is not good.so we replace 2 nos. Battery by new one. | Other | LODER NO. 9 | |
| 16207 | 16 May 2020 | Breakdown Shutdown | It's slipping cylinder has leakage. So we change it by spare one also tighting loose bolts of all cylinders. | Furnace I | ELECTRODE 3 | |
| 16208 | 16 May 2020 | Breakdown Maintenance | When we doing schedule maintenance we see that it's one bearing is not rotate. Than we check it. It's broken so we changed it by new one.bearing no is P210. | Other | CONVEYOR 2 ( WASHING PLANT) | |
| 16209 | 15 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 1 | |
| 16210 | 15 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 2
F1- ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 2 | |
 white.png){kind=small}