| 16181 | 20 May 2020 | Breakdown Shutdown | It's A6 contact clamp is leakage. So we change it by sapre one. | Furnace I | ELECTRODE 1 | |
| 16182 | 20 May 2020 | Breakdown Maintenance | This side one pipe line which is going to granulation tank for furnace 2 is damaged by LODER.
So leakage is coming from the pipe line. We dinging and remove the pipe line. Then repaired the line. Now it's ok. | Other | WASHING PLANT | |
| 16183 | 20 May 2020 | Other | For mansa
One D.O.L. starter make for 7.5 hp motor. | Other | BLUE OCEAN | |
| 16184 | 20 May 2020 | Other | For mansa
Washing plant roller 2 nos. tyre puncher making with one tyre valve pin fitting is done. Also balancing is done. | Other | BLUE OCEAN | |
| 16185 | 20 May 2020 | Breakdown Maintenance | It's one tyre is puncherd. So we repaired it. Now it's working | Other | WASHING PLANT | |
| 16186 | 20 May 2020 | Breakdown Maintenance | It's wire rope changed. Now it's ok. | Other | CARBON PASTE LIFTING CRANE | |
| 16187 | 19 May 2020 | Scheduled Maintenance | WATER CIRCULATION PUMP 1,2,3,
FURNACE 1
GRANULATION PUMP 1,2
POLLUTION WATER PUMP NO 1
FURNACE 2
GRANULATION PUMP 1,2,
POLLUTION WATER PUMP NO 1,
1. check the pump condition and check discharge.it is ok. all pumps running properly.
2. check coupling condition, alignment, and do greasing.greasing is done.
3. check pipelines and valve's condition. it's ok.
4. check cooling towers nozzles condition. it's ok.
| Other | PUMP | |
| 16188 | 19 May 2020 | Scheduled Maintenance | F1- GRANULATION MOTOR 1,2 WATER CIRCULATION PUMP MOTOR 1,2,3, SUBMERSIBLE PUMP MOTOR 1,2, POLLUTION WATER PUMP MOTOR
NO 1
F2- GRANULATION MOTOR 1,2, POLLUTION WATER PUMP MOTOR NO 1, OFFICE SUBMERSIBLE PUMP MOTOR 1,
WASHING PLANT SUBMERSIBLE PUMP MOTOR1
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. it's ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. water circulation pump motor greasing. greasing is done.
| Other | PUMP | |
| 16189 | 19 May 2020 | Breakdown Maintenance | 1.Hydraulic pump o ring damaged.so we open it and it's repairing is done. Now it's ok.
2.alternator bolt breaking. So we also open water pump and altornator and it's repairing is done. Now it's ok. | Other | LODER NO.2 | |
| 16190 | 19 May 2020 | Scheduled Maintenance | It's break liner, diffrential oil, and engine checking is done. | Other | ISUZU | |
 white.png){kind=small}