Maintenance Report

Search Filter:

Showing 16,171-16,180 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1617121 May 2020OtherAll load cells cleaning and checking is done.OtherRMHS CONVEYOR
1617220 May 2020Breakdown MaintenanceIts mesh 2 mm and 4 mm changed.OtherVIBRATOR SCREEN MACHINE ( WASHING PLANT)
1617320 May 2020Breakdown MaintenanceIt's centre pin is damaged. So we out it and repaired and cutting is done.now gusta carne is ok.OtherESCORT HYDRA
1617420 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.its ok. We tight foundation bolt of motor and gear box.
2. check the gearbox oil level, leakage, and fill if required.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing.greasing is done.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. When we check it. We found that it's gear is damage.so we change it.
2. check the gearbox oil level, leakage, and fill if required.small leakage found but we fill it by grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.it is ok.
2. check the thruster drum condition and its brake tightness.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
OtherTAPPING SEC. CRANE NO. 2
1617520 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3


LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Checking and greasing are done. It is ok.
2. check the gearbox oil level, leakage, and fill if required. No leakage but we fill grease.
3. check all fasteners and mounting bolts. It is OK.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. It is ok.
2. check the gearbox oil level, leakage, and fill if required. Leakage is there so we fill grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok. And greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok.
2. check the thruster drum condition and its brake tightness. It is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. gearbox is leakage and makes too much sound so we put grease.		OtherTAPPING SEC. CRANE NO. 3
1617620 May 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It is OK.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing. It is ok.

CT.
It is ok. Gear bearing is ok.

HT.
It's is ok. Pulley condition is ok		OtherCARBON PASTE LIFTING CRANE
1617720 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 1
1617820 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 2
1617920 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 3
1618020 May 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT., CT. ,HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts. Clean and tighting all loose parts.
3. all parts clean by hand blower.
4. No limit switches.
OtherCARBON PASTE LIFTING CRANE