| 16141 | 22 May 2020 | Breakdown Maintenance | It's current collector is out we repaired it. Now it's working. | Other | CHIPPING YARD CRANE NO. 1 | |
| 16142 | 22 May 2020 | Breakdown Maintenance | 400 w sodiyam lamp change at chipping yard. | Other | LAMP | |
| 16143 | 22 May 2020 | Scheduled Shutdown | Autotransformer and furnace transformer clean. | Furnace II | FURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR) | |
| 16144 | 22 May 2020 | Scheduled Maintenance | Engine maintenance is done.change engine oil 20 ltr. 2nos. Oil filter change.pirmary and secondary diesel filter change. | Other | LODER NO. 9 | |
| 16145 | 22 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 1 | |
| 16146 | 22 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower. | Furnace I | ELECTRODE 2 | |
| 16147 | 22 May 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 3
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower. | Furnace I | ELECTRODE 3 | |
| 16148 | 22 May 2020 | Scheduled Maintenance | FURNACE 1
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 16149 | 22 May 2020 | Scheduled Maintenance | FURNACE 1
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok. | Furnace I | HYDRAULIC POWER PACK NO. 2 | |
| 16150 | 22 May 2020 | Scheduled Maintenance | ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighting all loose parts.
3. all parts clean by hand blower.
| Furnace II | ELECTRODE 1 | |
 white.png){kind=small}