| 16121 | 23 May 2020 | Breakdown Maintenance | It's oil cooling pipe line is leakaged.it is repaired. Now its ok. | Other | 66 KV TRANSFORMER | |
| 16122 | 23 May 2020 | Breakdown Maintenance | Its light not working. We change the capacitor. Now its ok. | Other | WASHING PLANT | |
| 16123 | 23 May 2020 | Breakdown Maintenance | Lab oven coil is not working. Electrical people check it.its 2 nos. Coil is damaged. It is repaired. Now it's ok. | Other | LAB EQUIPMENT | |
| 16124 | 22 May 2020 | Scheduled Maintenance | FURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 16125 | 22 May 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.it is ok. temp. is good.
2. check transformer oil leakage.no leakage.
3. check crystal color.it is ok. | Furnace II | FURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR) | |
| 16126 | 22 May 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors. | Furnace II | FURNACE 2 TRANSFORMER NO. 2 | |
| 16127 | 22 May 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.it is ok. temp. is good.
2. check transformer oil leakage.no leakage.
3. check crystal color.it is ok. | Furnace I | FURNACE 1 TRANSFORMER | |
| 16128 | 22 May 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. it is ok. | Furnace I | CHARGING CHUTES | |
| 16129 | 22 May 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. it is ok. | Furnace II | CHARGING CHUTES | |
| 16130 | 22 May 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank.it is ok. no leakage.
2. check solenoid valve working conditions and adjust oil pressure.it is in good condition.
3. check hydraulic line leakage.no leakage. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
 white.png){kind=small}