Maintenance Report

Search Filter:

Showing 16,091-16,100 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1609127 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. check bearing condition it is ok. And greasing is done.
2. check the gearbox oil level, leakage, and fill if required. No leakage we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.greasing is done.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It has leakage but we fill some grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.

HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok. Greasing is done.
2. check all fasteners and mounting bolts. It is ok.
3. check frame welding conditions. It is ok.		OtherTAPPING SEC. CRANE NO. 1
1609227 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2


LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.its ok. We tight foundation bolt of motor and gear box.
2. check the gearbox oil level, leakage, and fill if required.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing.greasing is done.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. When we check it. We found that it's gear is damage.so we change it.
2. check the gearbox oil level, leakage, and fill if required.small leakage found but we fill it by grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.it is ok.
2. check the thruster drum condition and its brake tightness.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
OtherTAPPING SEC. CRANE NO. 2
1609327 May 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It is OK.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing. It is ok.

CT.
It is ok. Gear bearing is ok.

HT.
It's is ok. Pulley condition is ok 		OtherCARBON PASTE LIFTING CRANE
1609427 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 1
1609527 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 2
1609627 May 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 3
1609727 May 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT., CT. ,HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts. Clean and tighting all loose parts.
3. all parts clean by hand blower.
4. No limit switches.		OtherCARBON PASTE LIFTING CRANE
1609827 May 2020Breakdown MaintenanceIt's bearing is damaged. We change 2 nos. Bearing no. Is 6308. And also one B63 v belt fitting is done. Now it's ok.OtherVIBRATOR SCREEN MACHINE
1609927 May 2020Breakdown MaintenanceIt's front side pin is damaged. So we remove it and do welding.it's now working.OtherLODER NO.2
1610027 May 2020Breakdown MaintenanceHere new hot plate and one 3 pin top connection is done. OtherLAB EQUIPMENT