Maintenance Report

Search Filter:

Showing 16,061-16,070 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1606129 May 2020Scheduled MaintenanceFURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.		Furnace IIHYDRAULIC POWER PACK NO. 1
1606229 May 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tighten loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it is ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1606329 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1606429 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1606529 May 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IFURNACE 1 TRANSFORMER
1606629 May 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. it is ok. 		Furnace ICHARGING CHUTES
1606729 May 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. it is ok. 		Furnace IICHARGING CHUTES
1606829 May 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. IT IS OK.
2. check solenoid valve working conditions and adjust oil pressure. IT IS OK.
3. check hydraulic line leakage.		Furnace IHYDRAULIC POWER PACK NO. 1
1606929 May 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. IT IS OK.
2. check solenoid valve working conditions and adjust oil pressure. IT IS OK.
3. check hydraulic line leakage.		Furnace IIHYDRAULIC POWER PACK NO. 2
1607029 May 2020Scheduled Maintenance1. check the water manifold line, T section, and valves. some t section is not good and some dummies also not in good condition.
2. check leakage of hose pipes.it is ok. 		Furnace IWATER MAINEFOLD