| 16011 | 04 Jun 2020 | Breakdown Maintenance | It's arm main lock pin is broken. We fit new one. Now it's working. | Other | JCB 4DX | |
| 16012 | 04 Jun 2020 | Breakdown Maintenance | It's pressure ring one pipe is lekaged. We fill paste. Now it's ok. | Furnace I | ELECTRODE 3 | |
| 16013 | 04 Jun 2020 | Breakdown Maintenance | its A4 contact clamp is leakage. we fill paste. now it's ok. | Furnace I | ELECTRODE 1 | |
| 16014 | 04 Jun 2020 | Breakdown Maintenance | its C4 contact clamp is leakage. we fill paste. now it's ok. | Furnace I | ELECTRODE 3 | |
| 16015 | 04 Jun 2020 | Breakdown Maintenance | SUBMERSIBLE PUMP
Granulation tank F1
It's starter capacitor is not working. It's repaired. Now it's ok. | Other | SUBMERSIBLE PUMP | |
| 16016 | 03 Jun 2020 | Breakdown Maintenance | It's circuit fuse changing is done. Now it's ok. | Other | LODER NO.2 | |
| 16017 | 03 Jun 2020 | Scheduled Maintenance | TAPPING SECTION E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. check bearing condition it is ok. And greasing is done.
2. check the gearbox oil level, leakage, and fill if required. No leakage we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.greasing is done.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It has leakage but we fill some grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.
HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok. Greasing is done.
2. check all fasteners and mounting bolts. It is ok.
3. check frame welding conditions. It is ok. | Other | TAPPING SEC. CRANE NO. 1 | |
| 16018 | 03 Jun 2020 | Scheduled Maintenance | TAPPING SECTION E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. it's ok. We tight foundation bolt of motor and gearbox.
2. check the gearbox oil level, leakage, and fill if required.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing.greasing is done.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. When we check it. We found that it's gear is damage.so we change it.
2. check the gearbox oil level, leakage, and fill if required. small leakage found but we fill it by grease.
3. check all fasteners and mounting bolts.It is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.greasing is done.
HT.
1. check rope drum, hook, rope condition. greasing of rope.it is ok.
2. check the thruster drum condition and its brake tightness.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok. | Other | TAPPING SEC. CRANE NO. 2 | |
| 16019 | 03 Jun 2020 | Scheduled Maintenance | TAPPING SECTION E.O.T. CRANE 3
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Checking and greasing are done. It is ok.
2. check the gearbox oil level, leakage, and fill if required. No leakage but we fill grease.
3. check all fasteners and mounting bolts. It is OK.
4. check frame welding conditions. It is ok.we tight all loose bolts.
5. check end traveling gears condition and do the greasing. It is ok.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. It is ok.
2. check the gearbox oil level, leakage, and fill if required. Leakage is there so we fill grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok. And greasing is done.
HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok.
2. check the thruster drum condition and its brake tightness. It is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. gearbox is leakage and makes too much sound so we put grease. | Other | TAPPING SEC. CRANE NO. 3 | |
| 16020 | 03 Jun 2020 | Scheduled Maintenance | 3RD FLOOR CARBON PASTE LIFTING CRANE
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It is OK.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing. It is ok.
CT.
It is ok. Gear bearing is ok.
HT.
It's is ok. Pulley condition is ok | Other | CARBON PASTE LIFTING CRANE | |
 white.png){kind=small}