| 15951 | 10 Jun 2020 | Scheduled Maintenance | 3RD FLOOR CARBON PASTE LIFTING CRANE
LT, C.T, AND H.T.
1. checked the motor condition ( amp, volt, and connectivity). no noise coming. it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower. | Other | CARBON PASTE LIFTING CRANE | |
| 15952 | 10 Jun 2020 | Breakdown Maintenance | No. 4
It's back coil cover support spring plate full unit changed. | Other | RMHS VIBRO FEEDER | |
| 15953 | 10 Jun 2020 | Breakdown Maintenance | No.3
It's one side plate is damaged. So we weld it and than coil changed. | Other | RMHS VIBRO FEEDER | |
| 15954 | 09 Jun 2020 | Scheduled Maintenance | WATER CIRCULATION PUMP 1,2,3,
FURNACE 1
GRANULATION PUMP 1,2
SUBMERSIBLE PUMP 1,2,
POLLUTION WATER PUMP NO 1
FURNACE 2
GRANULATION PUMP 1,2,
POLLUTION WATER PUMP NO 1,
OFFICE SUBMERSIBLE PUMP 1,
WASHING PLANT SUBMERSIBLE PUMP 1
1. check the pump condition and check discharge.its ok.
2. check coupling condition, alignment, and do greasing.greasing is done.
3. check pipelines and valve's condition.its ok.
4. check cooling towers nozzles condition.its ok.
| Other | PUMP | |
| 15955 | 09 Jun 2020 | Scheduled Maintenance | F1- GRANULATION MOTOR 1,2 WATER CIRCULATION PUMP MOTOR 1,2,3, SUBMERSIBLE PUMP MOTOR 1,2, POLLUTION WATER PUMP MOTOR
NO 1
F2- GRANULATION MOTOR 1,2, POLLUTION WATER PUMP MOTOR NO 1, OFFICE SUBMERSIBLE PUMP MOTOR 1,
WASHING PLANT SUBMERSIBLE PUMP MOTOR1
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. it's ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. water circulation pump motor greasing. greasing is done. | Other | PUMP | |
| 15956 | 09 Jun 2020 | Other | one new blower fitting is done. | Other | POLLUTION 1 | |
| 15957 | 08 Jun 2020 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. IT IS OK.
2. check panel board, clean, & tight all loose parts. CLEAN AND TIGHTENING ALL LOOSE PARTS.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.IT IS OK. | Other | RMHS CONVEYOR | |
| 15958 | 08 Jun 2020 | Scheduled Maintenance | ALL VIBRATORS
check Vibro feeders coil connection, its condition and ensure its working properly with adjusting its vibrations.CHECKING AND ADJUSTING VIBRATION IS DONE. IT IS OK. | Other | RMHS VIBRO FEEDER | |
| 15959 | 08 Jun 2020 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. greasing of bearings. it is done.
2. lubrication of rollers and check conditions. it is ok.
3. check belt status ( if damaged than inform and change) and also check tightness, speed. ALL BELT CONVEYORS CONDITION IS OK EXCEPT BC 2. WE NEED TO CHANGE IT. WE INFORM IT TO HOD. WE CHANGE IT AS SOON AS POSSIBLE.
4. gearbox oil level check and if not then fill as per requirement. ALL GEARBOX ARE OK.
5. check coupling and key ( if damaged than inform and change) and do the greasing. IT IS OK. GREASING IS DONE.
6. check the drum condition. IT IS OK.
7. check mounting frame welding condition. IT IS OK.
8. check rollers condition and if not good then change. we changeONE ROLLER OF BC 6. | Other | RMHS CONVEYOR | |
| 15960 | 08 Jun 2020 | Breakdown Maintenance | SUBMERSIBLE PUMP
F1 GRANULATION
its water manifolds 4 nos valve changed. | Other | SUBMERSIBLE PUMP | |
 white.png){kind=small}