Maintenance Report

Search Filter:

Showing 15,941-15,950 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1594111 Jun 2020Scheduled MaintenanceAll load cell checking and calibration is done.OtherRMHS VIBRO FEEDER
1594211 Jun 2020Scheduled MaintenanceIt's blower shifted from one side to another side. Furnace IISEAL COOLING BLOWER
1594311 Jun 2020Scheduled MaintenanceIt's shifted from one side to other side.Furnace IISEAL COOLING BLOWER
1594410 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. SHAFT CONDITION IS GOOD.
2. check the gearbox oil level, leakage, and fill if required. GRAR BOX HAS LEAKAGE. WE FILL GREASE INSIDE.
3. check all fasteners and mounting bolts. IT IS OK.
4. check frame welding conditions. IT IS OK.
5. check end traveling gears condition and do the greasing.

CT.
ITS GEARS ARE OK. WE CHECKED GEARBOX AND FILL SOME GRESE.

HT.
ROPE AND HOOK CONDITION IS GOOD. WE GRESEING ROPE.		OtherTAPPING SEC. CRANE NO. 1
1594510 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2

LT.
1. checked coupling, shaft, and pedestal bearing condition and do the greasing. we greasing all couplings.
2. checked the gearbox oil level it is ok. no leakage.
3. checked all fasteners and mounting bolts. we found that 3 bolt of gearbox foundation is not there. so we mount it. now it's ok.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition. it is ok. and greasing is done.

CT.
1. checked coupling, shaft, and pedestal bearing condition and greasing done.
2. check the gearbox oil level. there is leakage in the gearbox. so we put some grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition. it is ok. greasing is done.

HT.
1. check rope drum, hook, rope condition.it is ok. The greasing of wire rope is done.
2. check the thruster drum condition and its brake tightness. it is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. it is ok.		OtherTAPPING SEC. CRANE NO. 2
1594610 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Checking and greasing are done. It is ok.
2. check the gearbox oil level, leakage, and fill if required. No leakage but we fill grease.
3. check all fasteners and mounting bolts. It is OK.
4. check frame welding conditions. It is ok.we tight all loose bolts.
5. check end traveling gears condition and do the greasing. It is ok.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. It is ok.
2. check the gearbox oil level, leakage, and fill if required. Leakage is there so we fill grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok. And greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok.
2. check the thruster drum condition and its brake tightness. It is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
5. gearbox is leakage and makes too much sound so we put grease.		OtherTAPPING SEC. CRANE NO. 3
1594710 Jun 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. checked coupling, shaft, it is ok.
2. check the gearbox oil level. it is ok. no leakage.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.it is ok.


CT.
roller and bearing condition is ok.

HT.
1. check rope drum, hook, rope condition.it is ok.
2. check frame welding conditions. it is ok.		OtherCARBON PASTE LIFTING CRANE
1594810 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1


LT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

CT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

HT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.		OtherTAPPING SEC. CRANE NO. 1
1594910 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2


LT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

CT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

HT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.		OtherTAPPING SEC. CRANE NO. 2
1595010 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

CT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.

HT.
1. checked the motor condition ( amp, volt, and connectivity). it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition.it is ok.		OtherTAPPING SEC. CRANE NO. 3