| 15921 | 12 Jun 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank.it is ok. no leakage.
2. check solenoid valve working conditions and adjust oil pressure.it is in good condition.
3. check hydraulic line leakage.no leakage. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 15922 | 12 Jun 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank.it is ok. no leakage.
2. check solenoid valve working conditions and adjust oil pressure.it is in good condition.
3. check hydraulic line leakage.no leakage. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 15923 | 12 Jun 2020 | Scheduled Maintenance | 1. check the water manifold line, T section, and valves.some t section is not ok.
2. check leakage of hose pipes.it is ok. | Furnace I | WATER MAINEFOLD | |
| 15924 | 12 Jun 2020 | Scheduled Maintenance | 1. check the water manifold line, T section, and valves.it is ok.
2. check leakage of hose pipes.no leakage. | Furnace II | WATER MAINEFOLD | |
| 15925 | 12 Jun 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD.no leakage. it is ok. | Furnace I | ELECTRODE 2 | |
| 15926 | 12 Jun 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD.no leakage. it is ok. | Furnace I | ELECTRODE 3 | |
| 15927 | 12 Jun 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD.no leakage. it is ok. | Furnace I | ELECTRODE 1 | |
| 15928 | 11 Jun 2020 | Breakdown Maintenance | It's one tyre is changed. We replace it by old one. | Other | LODER NO. 9 | |
| 15929 | 11 Jun 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.checked and greasing is done.
2. check the gearbox oil level, leakage, and fill if required. we found leakage so we fill some amount of grease.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions. it is not ok. its shaft condition is not good.
5. check end traveling gears condition and do the greasing. it is ok.
CT.
gears are ok. it is good in condition.
HT.
1. check rope drum, hook, rope condition. greasing of rope.rope greasing is done. it is in good condition.
2. check the thruster drum condition and its brake tightness.no thruster.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions.it is ok. | Other | CHIPPING YARD CRANE NO. 1 | |
| 15930 | 11 Jun 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
LT.
1. checked coupling, shaft, and pedestal bearing condition it is good. Greasing is done.
2. check the gearbox oil level. It is ok no leakage.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition. It is ok and greasing is done.
CT
1. checked coupling, shaft, and pedestal bearing condition it is good. Greasing is done.
2. check the gearbox oil level. It is ok no leakage.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition. It is ok and greasing is done.
HT
1. checked rope drum, hook, rope condition. It is ok.greasing of rope is done. | Other | CHIPPING YARD CRANE NO. 2 | |
 white.png){kind=small}