Maintenance Report

Search Filter:

Showing 15,851-15,860 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1585119 Jun 2020Scheduled MaintenanceELECTRODE BLOWER 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 2
1585219 Jun 2020Scheduled Maintenance ELECTRODE BLOWER 3

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 3
1585319 Jun 2020Scheduled MaintenanceFURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.its ok.		Furnace IIHYDRAULIC POWER PACK NO. 1
1585419 Jun 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.its ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1585519 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1585619 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1585719 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IFURNACE 1 TRANSFORMER
1585819 Jun 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage.		Furnace ICHARGING CHUTES
1585919 Jun 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage.		Furnace IICHARGING CHUTES
1586019 Jun 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.it is ok. no leakage.
2. check solenoid valve working conditions and adjust oil pressure.it is in good condition.
3. check hydraulic line leakage.no leakage.		Furnace IHYDRAULIC POWER PACK NO. 1