Maintenance Report

Search Filter:

Showing 15,811-15,820 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1581125 Jun 2020Scheduled MaintenancePOLLUTION ID FANS FOR (Furnace 2)
1. open cover and clean dust.clean and balancing is done.
2. check the balancing of impeller and vibration isolation.it is ok.
3. check v belts condition and inform if it's on critical stage.it is ok.
4. check foundation bolts and nuts of Plummer blocks.it is ok.its making vibrations because of too much dust inside. so we clean and fighting all foundations bolts.
5. greasing the Plummer blocks.greasing is done.
6. check the duct condition and remove dust from the duct. dust remove, impeller clean and start.
7. check stack condition and check its temperature. it is ok.		OtherPOLLUTION 2
1581225 Jun 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherCHIPPING YARD CRANE NO. 1
1581325 Jun 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 2

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherCHIPPING YARD CRANE NO. 2
1581425 Jun 2020Scheduled MaintenanceTELPHER FOR F1
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
OtherTELPHER (FURNACE 1)
1581525 Jun 2020Scheduled MaintenanceTELPHER FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.		OtherTELPHER ( FURNACE 2)
1581625 Jun 2020Scheduled MaintenancePOLLUTION ID FANS FOR F1
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
4. MOTOR GREASING.
OtherPOLLUTION 1
1581725 Jun 2020Scheduled MaintenancePOLLUTION ID FANS FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
4. MOTOR GREASING.
OtherPOLLUTION 2
1581824 Jun 2020Breakdown MaintenanceIt's Plummer block foundation is broken due to heavy vibration.we change it by new one. It's no. Is SN524.OtherPOLLUTION 2, ID FAN NO. 1
1581924 Jun 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. SHAFT CONDITION IS GOOD.
2. check the gearbox oil level, leakage, and fill if required. Gear BOX HAS LEAKAGE. WE FILL GREASE INSIDE.
3. check all fasteners and mounting bolts. IT IS OK.
4. check frame welding conditions. IT IS OK.
5. check end traveling gears condition and do the greasing.

CT.
Greasing of the gearbox is done.
its belt and pully condition is ok.
HT.
greasing of rope is done. hook and wire rope condition is ok.		OtherTAPPING SEC. CRANE NO. 1
1582024 Jun 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. checked coupling, shaft, it is ok.
2. check the gearbox oil level. it is ok. no leakage.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.it is ok.


CT.
roller and bearing condition is ok.

HT.
1. check rope drum, hook, rope condition.it is ok.
2. check frame welding conditions. it is ok.		OtherCARBON PASTE LIFTING CRANE