Maintenance Report

Search Filter:

Showing 15,791-15,800 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1579126 Jun 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.it's ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1579226 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok. 		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1579326 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok. 		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1579426 Jun 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok. 		Furnace IFURNACE 1 TRANSFORMER
1579526 Jun 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition.no. 1 and n0. 2 chutes solenoid is not working. we change no1. chute solenoid and repairs no.2 solenoid valve.
we repair no.3 chute cylinder leakage.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is than inform HOD.small lekage in no. 1 and no. 3 chutes line. we repair it. now its ok.		Furnace ICHARGING CHUTES
1579626 Jun 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition.number 2 chute solenoid are not working. It has heavy leakage of air. we change it. now it's ok.
2.check pneumatic cylinders and air supply lines.
3. check charging chute leakage. if it is then inform HOD.no lekage in pipe line.		Furnace IICHARGING CHUTES
1579726 Jun 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.its ok.
2. check solenoid valve working conditions and adjust oil pressure.solenoid is ok.
3. check hydraulic line leakage. E1 slipping cylinder leakage. we tight nut. now its ok.		Furnace IHYDRAULIC POWER PACK NO. 1
1579826 Jun 2020Scheduled Maintenance1. checking loose parts and checked the hydraulic oil level in the tank. The oil level is ok.
2. check solenoid valve working conditions. all valve working properly.
3.No leakage in line.		Furnace IIHYDRAULIC POWER PACK NO. 2
1579926 Jun 2020Scheduled Maintenance1. check the water manifold line, T section, and valves. some t section is not good. and some dummies also not in good condition.
2. check leakage of hose pipes. one hose pipe of electrode 2 is repaired. now it's ok.		Furnace IWATER MAINEFOLD
1580026 Jun 2020Scheduled Maintenance1. check the water manifold line, T section, and valves. some t section is not good.
2. check leakage of hose pipes.it is ok.it is ok.		Furnace IIWATER MAINEFOLD