Maintenance Report

Search Filter:

Showing 15,751-15,760 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1575101 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. its gear coupling has no hole for greasing. we open and fill inside grease.
2. check the gearbox oil level, leakage, and fill if required. gearbox side level is ok. we fill a small amount of grease.
3. check all fasteners and mounting bolts. tight gearbox foundation bolts.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing. greasing is done.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. v-belt condition is ok. we tight belt.
2. check the gearbox oil level, leakage, and fill if required. gearbox has leakage. so we fill grease.
3. check all fasteners and mounting bolts. tight gear box plate nut and bolts.
4. check frame welding conditions. it is ok.
5. check end traveling gears condition and do the greasing. greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness. it is ok. we fill 5 ltr. gear box oil in gear box side.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
OtherTAPPING SEC. CRANE NO. 1
1575201 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2
its H.T. motor is burned. elect. department working on it.

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
OtherTAPPING SEC. CRANE NO. 2
1575301 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. coupling greasing is done.
2. check the gearbox oil level, leakage, and fill if required. gearbox has leakage. we fill grease.
3. check all fasteners and mounting bolts. gearbox side and 2 coupling side bolt fitting is done.
4. check frame welding conditions. its ok.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing of cooling is done.
2. check the gearbox oil level, leakage, and fill if required. gearbox side small amount of grease filling is done.
3. check all fasteners and mounting bolts.its ok.
4. check frame welding conditions.it ok.
5. check end traveling gears condition and do the greasing.greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness. gearbox make noise so we fill grease.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
OtherTAPPING SEC. CRANE NO. 3
1575401 Jul 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.gearbox oil level is ok.coupling greasing is done.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.its ok.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

CT.
its gear condition is ok.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT. rope condition is ok.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness. no thruster.
3. check all fasteners and mounting bolts.its ok.
4. check frame welding conditions. it ok.
OtherCARBON PASTE LIFTING CRANE
1575501 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly		OtherTAPPING SEC. CRANE NO. 1
1575601 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2
its H.T. motor is burning.we send it to rewinding.
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
OtherTAPPING SEC. CRANE NO. 2
1575701 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly		OtherTAPPING SEC. CRANE NO. 3
1575801 Jul 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT, C.T, AND H.T.
1. checked the motor condition ( amp, volt, and connectivity). no noise coming. it is ok.
2. checked panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.		OtherCARBON PASTE LIFTING CRANE
1575901 Jul 2020Breakdown Maintenanceits has heavy vibration. we clean and start.OtherPOLLUTION 2, ID FAN NO. 1
1576001 Jul 2020Breakdown Maintenance66 kv side one tube light changed.Other66 KV POWER LINE