| 15741 | 02 Jul 2020 | Scheduled Maintenance | TELPHER FOR F2
1. checking the bearing, rollers condition and do lubrication.it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition.it is ok.
| Other | TELPHER ( FURNACE 2) | |
| 15742 | 02 Jul 2020 | Scheduled Maintenance | POLLUTION ID FANS (Furnace 1)
1. open cover and clean dust.clean and check.
2. check the balancing of impeller and vibration isolation.it is ok.
3. check v belts condition and inform if its on critical stage.v belt conditions are ok.
4. check foundation bolts and nuts of Plummer blocks.it is ok. Greasing is done.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
| Other | POLLUTION 1 | |
| 15743 | 02 Jul 2020 | Scheduled Maintenance | POLLUTION ID FANS FOR (Furnace 2)
1. open cover and clean dust.clean dust and start.
2. check the balancing of impeller and vibration isolation.vibration is ok.when dust stuck on impeller blades. It's creats vibration.
3. check v belts condition and inform if its on critical stage.it is ok.
4. check foundation bolts and nuts of Plummer blocks.tight.
5. greasing the Plummer blocks.greasing is done.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
8. Motor greasing is done.
| Other | POLLUTION 2 | |
| 15744 | 02 Jul 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
LT.
1. check motor condition.
2. checked panel board, clean, & tight all loose parts.
4. check limit switches and its condition.it is ok.
CT.
1. check the motor condition. it is ok.
2.check limit switches and their condition.it is ok.
HT.
1. check the motor condition. it is ok. | Other | CHIPPING YARD CRANE NO. 1 | |
| 15745 | 02 Jul 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.
CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.
HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly | Other | CHIPPING YARD CRANE NO. 2 | |
| 15746 | 02 Jul 2020 | Scheduled Maintenance | TELPHER FOR F1
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
| Other | TELPHER (FURNACE 1) | |
| 15747 | 02 Jul 2020 | Scheduled Maintenance | TELPHER FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
| Other | TELPHER ( FURNACE 2) | |
| 15748 | 02 Jul 2020 | Scheduled Maintenance | POLLUTION ID FANS FOR F1
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
4. MOTOR GREASING.
| Other | POLLUTION 1 | |
| 15749 | 02 Jul 2020 | Scheduled Maintenance | POLLUTION ID FANS FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
4. MOTOR GREASING. | Other | POLLUTION 2 | |
| 15750 | 02 Jul 2020 | Breakdown Maintenance | its cable cuts. we rejoin it. now its ok. | Other | CHIPPING YARD CRANE NO. 2 | |
 white.png){kind=small}