| 15731 | 03 Jul 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean and tight all bolts.
2. check leakage of hydraulic oil. if it is then informed to HOD.change tight all cylinders bolts and nuts. | Furnace I | ELECTRODE 2 | |
| 15732 | 03 Jul 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean and tight all bolts.
2. check leakage of hydraulic oil. if it is then informed to HOD.change tight all cylinders bolts and nuts. | Furnace I | ELECTRODE 3 | |
| 15733 | 03 Jul 2020 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders. clean and tight all bolts.
2. check leakage of hydraulic oil. if it is then informed to HOD.change lower clamping cylinder. and tight all cylinders bolts and nuts. | Furnace I | ELECTRODE 1 | |
| 15734 | 03 Jul 2020 | Other | one transformer is connected with a submersible pump. we fixed it. now its ok. | Other | BLUE OCEAN | |
| 15735 | 03 Jul 2020 | Scheduled Shutdown | furnace 1 shutdown Details :Electrode no 1:
A2 clamp changed, pressure ring ms pipe changing.
Electrode no 2:
B1,tie rod changed and
B2 clamp leakage it was brazing done.
Electrode no 3 :
C2 clamp tie rod changed and pressuring ms pipe changed and sealbox rope changed.
All slipping and hoisting hydraulic cylinder bolts are tight.
Water circulation manifold 5nos T section changed,
water hose pipe 4nos changed,
charging chutes no1&7extantion and welding work was done. | Furnace I | FURNACE 1 | |
| 15736 | 02 Jul 2020 | Breakdown Maintenance | muffle furnace
we checked it.
its coil is damaged.its. Repaired. Now it's working. | Other | LAB EQUIPMENT | |
| 15737 | 02 Jul 2020 | Breakdown Maintenance | its switch off for cleaning the water tank. its running now. | Other | POLLUTION 2 | |
| 15738 | 02 Jul 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.checked and greasing is done.
2. check the gearbox oil level, leakage, and fill if required. we found leakage so we fill some amount of grease.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions. it is not ok. its shaft condition is not good. we need to change it.shaft making work is in progress.
5. check end traveling gears condition and do the greasing. it is ok.
CT.
gears are ok. it is good in condition.
HT.
1. check rope drum, hook, rope condition. greasing of rope.rope greasing is done. it is in good condition.
2. check the thruster drum condition and its brake tightness.no thruster.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions.it is ok. | Other | CHIPPING YARD CRANE NO. 1 | |
| 15739 | 02 Jul 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing is done.
2. check the gearbox oil level, leakage, and fill if required.no leakage. We fill small amount of grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.grwasing is done. Shaft condition is ok.
2. check the gearbox oil level, leakage, and fill if required.no leakage. We fill small amount of grease.
3. check all fasteners and mounting bolts.coupling side only 1 bolt. We fit 5 nos. Bolts.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.
Greasing is done.
HT.
1. check rope drum, hook, rope condition. greasing of rope.greasing is done.
2. check the thruster drum condition and its brake tightness.no thruster.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.
5.we fill 2.5 ltr. Gear box oil.
| Other | CHIPPING YARD CRANE NO. 2 | |
| 15740 | 02 Jul 2020 | Scheduled Maintenance | TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.cheking it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition.It is ok.
| Other | TELPHER (FURNACE 1) | |
 white.png){kind=small}