Maintenance Report

Search Filter:

Showing 15,691-15,700 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1569109 Jul 2020Scheduled MaintenancePOLLUTION ID FANS FOR F1
1. checking the bearing, rollers condition, and do lubrication.cheking it is ok.
2. checking frames welding condition.it is ok.
3. MOTOR GREASING.
OtherPOLLUTION 1
1569209 Jul 2020Scheduled MaintenancePOLLUTION ID FANS FOR F2
TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.cheking it is ok.
2. checking frames welding condition.it is ok.
3. MOTOR GREASING.
OtherPOLLUTION 2
1569309 Jul 2020Scheduled Maintenanceits circuit breaker battery charger new fitting is done.Other66 KV POWER LINE
1569409 Jul 2020Breakdown MaintenanceITS SHAFT IS BROKEN FROM INSIDE. WE WELD IT NOW it's OK.
we weld plates also inside now cock pieces not stuck inside the drum.		Othercock crusher
1569508 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing is done. its LT. coupling does not have holes for greasing. we open it and fill grease.
2. check the gearbox oil level, leakage, and fill if required. we fill grease.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing. we grease it.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. we greasing it.it's ok.
2. check the gearbox oil level, leakage, and fill if required.gearbox has leakage. we fill it with grease.
3. check all fasteners and mounting bolts.it's ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing. we grease it.

HT.
1. check rope drum, hook, rope condition. greasing of rope. The greasing of rope is done.
2. check the thruster drum condition and its brake tightness. no thruster.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions. it's ok.
OtherTAPPING SEC. CRANE NO. 1
1569608 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2
its H.T. motor is burning. elect. department working on it.

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
OtherTAPPING SEC. CRANE NO. 2
1569708 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. its coupling is ok. we grease it.
2. check the gearbox oil level, leakage, and fill if required. we fill grease.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. we greasing it.
2. check the gearbox oil level, leakage, and fill if required. its leakages. we fill grease.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing. we grease it.

HT.
1. check rope drum, hook, rope condition. greasing of rope. already there is grease. we fill grease inside of the gearbox.
2. check the thruster drum condition and its brake tightness. it's ok.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions.
OtherTAPPING SEC. CRANE NO. 3
1569808 Jul 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. greasing is done.
2. check the gearbox oil level, leakage, and fill if required. leakage is there we fill grease.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions. its ok.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required. is gear condition is ok.
3. check all fasteners and mounting bolts. its ok.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT.
1. check rope drum, hook, rope condition. greasing of rope. The greasing of rope is done.
2. check the thruster drum condition and its brake tightness. no thruster.
3. check all fasteners and mounting bolts.
4. check frame welding conditions. its ok.
OtherCARBON PASTE LIFTING CRANE
1569908 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 1
1570008 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2
its motor is burned. we send it to rewinding.
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
OtherTAPPING SEC. CRANE NO. 2