Maintenance Report

Search Filter:

Showing 15,681-15,690 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1568109 Jul 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 1
LT.
. check coupling, shaft, and pedestal bearing condition and do the greasing.checked and greasing is done.
2. check the gearbox oil level, leakage, and fill if required. we found leakage so we fill some amount of grease.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions. it is not ok. its shaft condition is not good. we need to change it.shaft making work is in progress.
5. check end traveling gears condition and do the greasing. it is ok.

CT.
gears are ok. it is good in condition.
HT.
1. check rope drum, hook, rope condition. greasing of rope.rope greasing is done. it is in good condition.
2. check the thruster drum condition and its brake tightness.no thruster.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions.it is ok.		OtherCHIPPING YARD CRANE NO. 1
1568209 Jul 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 2

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing is done.
2. check the gearbox oil level, leakage, and fill if required.no leakage. We fill a small amount of grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing is done. Shaft condition is ok.
2. check the gearbox oil level, leakage, and fill if required.no leakage. We fill a small amount of grease.
3. check all fasteners and mounting bolts. it's ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.
Greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.greasing is done.
2. check the thruster drum condition and its brake tightness.no thruster.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.it is ok.		OtherCHIPPING YARD CRANE NO. 2
1568309 Jul 2020Scheduled MaintenanceTELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.cheking it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition. It is ok.

OtherTELPHER (FURNACE 1)
1568409 Jul 2020Scheduled MaintenanceTELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.cheking it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition. It is ok.
OtherTELPHER ( FURNACE 2)
1568509 Jul 2020Scheduled MaintenancePOLLUTION ID FANS (Furnace 1)
1. open cover and clean dust.clean and check.
2. check the balancing of impeller and vibration isolation.it is ok.
3. check v belts condition and inform if it's on critical stage.v belt conditions are ok.
4. check foundation bolts and nuts of Plummer blocks.it is ok. Greasing is done.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.		OtherPOLLUTION 1
1568609 Jul 2020Scheduled MaintenancePOLLUTION ID FANS FOR (Furnace 2)
1. open cover and clean dust.clean and check.
2. check the balancing of impeller and vibration isolation.it is ok.
3. check v belts condition and inform if it's on critical stage.v belt conditions are ok.
4. check foundation bolts and nuts of Plummer blocks.it is ok. Greasing is done.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.		OtherPOLLUTION 2
1568709 Jul 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 1

LT.
1. check motor condition.
2. checked panel board, clean, & tight all loose parts.
4. check limit switches and its condition.it is ok.

CT.
1. check the motor condition. it is ok.
2.check limit switches and their condition.it is ok.

HT.
1. check the motor condition. it is ok.		OtherCHIPPING YARD CRANE NO. 1
1568809 Jul 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 2

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly		OtherCHIPPING YARD CRANE NO. 2
1568909 Jul 2020Scheduled MaintenanceTELPHER FOR F1
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.


OtherTELPHER (FURNACE 1)
1569009 Jul 2020Scheduled MaintenanceTELPHER FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
OtherTELPHER ( FURNACE 2)