Maintenance Report

Search Filter:

Showing 15,631-15,640 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1563115 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 1
1563215 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 2

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 2
1563315 Jul 2020Scheduled MaintenanceTAPPING SECTION E.O.T. CRANE 3

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.it is ok. working properly.		OtherTAPPING SEC. CRANE NO. 3
1563415 Jul 2020Scheduled Maintenance3RD FLOOR CARBON PASTE LIFTING CRANE

LT., CT. , HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts. Clean and tighten all loose parts.
3. all parts clean by hand blower.
4. No limit switches.		OtherCARBON PASTE LIFTING CRANE
1563514 Jul 2020Breakdown MaintenancePollution id fan has vibration. We clean it and tight bolts . Now it's ok.OtherPOLLUTION 2, ID FAN NO. 2
1563614 Jul 2020Scheduled MaintenanceWATER CIRCULATION PUMP 1,2,3,
we greasing pump no. 2 its ready and is in standby.
FURNACE 1
GRANULATION PUMP 1,2
it's ok. we greasing coupling.
SUBMERSIBLE PUMP 1,2,
POLLUTION WATER PUMP NO 1
It has heavy leakage. we fix it with gland rope. but still leakage. we need new monoblock.
FURNACE 2
GRANULATION PUMP 1,2,
pump no. 1 coupling bolt is loosed. we replace it with gear coupling.

POLLUTION WATER PUMP NO 1,
its has leakage. we fix the leakage.
OFFICE SUBMERSIBLE PUMP 1,
WASHING PLANT SUBMERSIBLE PUMP 1

1. check the pump condition and check discharge.
2. check coupling condition, alignment, and do greasing.
3. check pipelines and valve's condition.
4. check cooling towers nozzles condition. its condition is ok.
OtherPUMP
1563714 Jul 2020Scheduled MaintenanceF1- GRANULATION MOTOR 1,2 WATER CIRCULATION PUMP MOTOR 1,2,3, SUBMERSIBLE PUMP MOTOR 1,2, POLLUTION WATER PUMP MOTOR
NO 1

F2- GRANULATION MOTOR 1,2, POLLUTION WATER PUMP MOTOR NO 1, OFFICE SUBMERSIBLE PUMP MOTOR 1,
WASHING PLANT SUBMERSIBLE PUMP MOTOR1

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.checked and clean.
2. check panel board, clean, & tight all loose parts.clean,tight all loose parts.
3. all parts clean by hand blower.
4. water circulation pump motor greasing. It's ok. We was greased it last time.

5. We need to change both pollution pumps because of leakage.
OtherPUMP
1563814 Jul 2020Breakdown Maintenancepump no. 2
its Oldham coupling nut bolts are loose. because Oldham coupling does not work at high speed. when we doing scheduled maintenance. we changed replace it with gear coupling.		OtherGRANULATION TANK (FURNACE 2)
1563913 Jul 2020Breakdown MaintenanceIt's contact clamp no. A4 is leakage. We fill pulp now it's ok.Furnace IIELECTRODE 1
1564013 Jul 2020Scheduled ShutdownWhen we check daily basis. We found that it's not have hydraulic oil. So we fill 30 ltr. Oil.OtherJCB 4DX