| 15551 | 24 Jul 2020 | Scheduled Maintenance | ELECTRODE BLOWER 3
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower. | Furnace II | ELECTRODE 3 | |
| 15552 | 24 Jul 2020 | Scheduled Maintenance | FURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. its ok. | Furnace II | HYDRAULIC POWER PACK NO. 1 | |
| 15553 | 24 Jul 2020 | Scheduled Maintenance | FURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. its ok. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 15554 | 24 Jul 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.it is ok. temp. is good.
2. check transformer oil leakage.no leakage.
3. check crystal color.it is ok. | Furnace II | FURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR) | |
| 15555 | 24 Jul 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.it is ok. temp. is good.
2. check transformer oil leakage.no leakage.
3. check crystal color.it is ok. | Furnace II | FURNACE 2 TRANSFORMER NO. 2 | |
| 15556 | 24 Jul 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.it is ok. temp. is good.
2. check transformer oil leakage.no leakage.
3. check crystal color.it is ok. | Furnace I | FURNACE 1 TRANSFORMER | |
| 15557 | 24 Jul 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage. | Furnace I | CHARGING CHUTES | |
| 15558 | 24 Jul 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage. | Furnace II | CHARGING CHUTES | |
| 15559 | 24 Jul 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank.it is
ok.
2. check solenoid valve working conditions and adjust oil pressure. it is ok.
3. check hydraulic line leakage.no leakage. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 15560 | 24 Jul 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank.it is ok.
2. check solenoid valve working conditions and adjust oil pressure. it is ok.
3. check hydraulic line leakage.no leakage. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
 white.png){kind=small}