Maintenance Report

Search Filter:

Showing 15,381-15,390 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1538114 Aug 2020Scheduled MaintenanceELECTRODE BLOWER 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 2
1538214 Aug 2020Scheduled Maintenance ELECTRODE BLOWER 3

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 3
1538314 Aug 2020Scheduled MaintenanceFURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. all solenoids are checking and it's ok.
Furnace IIHYDRAULIC POWER PACK NO. 1
1538414 Aug 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. all solenoids are checking and it's ok.
Furnace IIHYDRAULIC POWER PACK NO. 2
1538514 Aug 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1538614 Aug 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1538714 Aug 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is not ok. when its come we will change it.		Furnace IFURNACE 1 TRANSFORMER
1538814 Aug 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. we check all solenoid valves. its ok.
2.check pneumatic cylinders and air supply lines. its ok.
3. check charging chute leakage. if it is then inform HOD.		Furnace ICHARGING CHUTES
1538914 Aug 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. we check all solenoid valves. it's ok.
2.check pneumatic cylinders and air supply lines. it's ok.
3. check charging chute leakage. if it is then inform HOD.		Furnace IICHARGING CHUTES
1539014 Aug 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. hydraulic tank level is ok. slipping side small amount of leakage.
2. check solenoid valve working conditions and adjust oil pressure. it's ok.
3. check hydraulic line leakage. one hoisting cylinder side pipe is leakage, we change it on the next shutdown.		Furnace IHYDRAULIC POWER PACK NO. 1