| 15351 | 19 Aug 2020 | Scheduled Maintenance | 3RD FLOOR CARBON PASTE LIFTING CRANE
LT., CT. , HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts. Clean and tighten all loose parts.
3. all parts clean by hand blower.
4. No limit switches. | Other | CARBON PASTE LIFTING CRANE | |
| 15352 | 19 Aug 2020 | Breakdown Maintenance | POLLUTION OFF DUE TO MECH. GUYS REMOVING DUST FROM POLLUTION CYCLONE. | Other | POLLUTION 1 | |
| 15353 | 19 Aug 2020 | Breakdown Shutdown | ITS SEAL WATER COOLING HOSE PIPE IS DAMAGED. WE CUT SMALL PIECE AND FIX IT. NOW ITS OK. | Furnace I | ELECTRODE 1 | |
| 15354 | 19 Aug 2020 | Scheduled Maintenance | guest house side 25 led lights fiting is done. | Other | GUEST HOUSE | |
| 15355 | 19 Aug 2020 | Breakdown Maintenance | spray motor capacitor change. | Other | WASHING PLANT | |
| 15356 | 19 Aug 2020 | Scheduled Maintenance | 3 nos cameras fitting is done. | Other | CAMERA | |
| 15357 | 19 Aug 2020 | Scheduled Maintenance | starter and motor connection given. | Other | Magnetic dust cleaner | |
| 15358 | 19 Aug 2020 | Scheduled Maintenance | When we check it. I have a doubt that its H.T. motor side noise coming. when I was run it and hearing the noise it's like that rotor is touching the stator winding. then we open the motor and check it that its shaft is bend due to uneven forces that are transferred by shock waves. its shaft is ready. we assemble motor and fit it on crane its working well.
TAPPING SECTION E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. check bearing condition it is ok. And greasing is done.
2. check the gearbox oil level, leakage, and fill if required. No leakage we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.greasing is done.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It has leakage but we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.
HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok. Greasing is done.
2. check all fasteners and mounting bolts. It is ok.
3. check frame welding conditions. It is ok.
4. gearbox oil level is ok. | Other | TAPPING SEC. CRANE NO. 2 | |
| 15359 | 19 Aug 2020 | Scheduled Maintenance | mechanical team open its motor.
today we fitting motor with mechanical dept.
TAPPING SECTION E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. check bearing condition it is ok. And greasing is done.
2. check the gearbox oil level, leakage, and fill if required. No leakage we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.greasing is done.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done.
2. check the gearbox oil level, leakage, and fill if required. It has leakage but we fill some grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.
HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok. Greasing is done.
2. check all fasteners and mounting bolts. It is ok.
3. check frame welding conditions. It is ok.
4. gearbox oil level is ok. | Other | TAPPING SEC. CRANE NO. 2 | |
| 15360 | 18 Aug 2020 | Scheduled Maintenance | WATER CIRCULATION PUMP 1,2,3,
pump no. 2 is ready.
FURNACE 1
GRANULATION
SUBMERSIBLE PUMP 1,2, PUMP 1,2
it's ok.
POLLUTION WATER PUMP NO 1
It has heavy leakage. we fix it with gland rope. but still leakage. we need new monoblock.
FURNACE 2
GRANULATION PUMP 1,2,
The greasing of coupling is done.
POLLUTION WATER PUMP NO 1,
it has leakage. we fix the leakage. now it's ok.
OFFICE SUBMERSIBLE PUMP 1,
WASHING PLANT SUBMERSIBLE PUMP 1
washing plant side pump is ok.
1. check the pump condition and check discharge.
2. check coupling condition, alignment, and do greasing.
3. check pipelines and valve's condition.
4. check cooling towers nozzles condition. its condition is ok. | Other | PUMP | |
 white.png){kind=small}