Maintenance Report

Search Filter:

Showing 15,321-15,330 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1532121 Aug 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.level is ok. hoisting oil level is showing low. we open it and check and find that cylinders are open so oil level indicator showing low.
2. check solenoid valve working conditions and adjust oil pressure.its ok.
3. check hydraulic line leakage. small leakage in one cylinder.tight all is ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1532221 Aug 2020Scheduled Maintenance1. check the water manifold line, T section, and valves.
2. check leakage of hose pipes. hose pipe is ok.		Furnace IWATER MAINEFOLD
1532321 Aug 2020Scheduled Maintenance1. check the water manifold line, T section, and valves.one valve is not ok. we change it on next time.
2. check leakage of hose pipes. no leakage.		Furnace IIWATER MAINEFOLD
1532421 Aug 2020Scheduled Maintenance1. by air pipe clean dust from all cylinders.clean by air.
2. check leakage of hydraulic oil. if it is then informed to HOD.its ok. no leakage.		Furnace IELECTRODE 2
1532521 Aug 2020Scheduled Maintenance1. by air pipe clean dust from all cylinders. clean and checked.
2. check leakage of hydraulic oil. if it is then informed to HOD.no leakage.		Furnace IELECTRODE 3
1532621 Aug 2020Scheduled Maintenance1. by air pipe clean dust from all cylinders. clean and checked.
2. check leakage of hydraulic oil. if it is then informed to HOD.no leakage.		Furnace IELECTRODE 1
1532721 Aug 2020Scheduled Maintenance2nd floor side 2 camera fitting is done.OtherCAMERA
1532821 Aug 2020Scheduled Maintenance22 kw submersible pump coil winding checking and cable joinning is done.OtherSUBMERSIBLE PUMP
1532921 Aug 2020Breakdown MaintenanceDrill machine carbon brush fitting is done.OtherDRILL MACHINE
1533021 Aug 2020Scheduled Maintenanceits motor pulley changed. now rpm around 810.OtherPOLLUTION 2, ID FAN NO. 1