Maintenance Report

Search Filter:

Showing 15,311-15,320 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1531121 Aug 2020Scheduled MaintenanceELECTRODE BLOWER 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 2
1531221 Aug 2020Scheduled Maintenance ELECTRODE BLOWER 3

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 3
1531321 Aug 2020Scheduled MaintenanceFURNACE 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. it's ok.		Furnace IIHYDRAULIC POWER PACK NO. 1
1531421 Aug 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. it's ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1531521 Aug 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1531621 Aug 2020Scheduled Maintenance Maintenance 1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1531721 Aug 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color.it is not ok. when its come we will change it.		Furnace IFURNACE 1 TRANSFORMER
1531821 Aug 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition.it's ok.
2.check pneumatic cylinders and air supply lines. all lines are ok.
3. check charging chute leakage. if it is then inform HOD.		Furnace ICHARGING CHUTES
1531921 Aug 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition.it's ok.
2.check pneumatic cylinders and air supply lines. all lines are ok.
3. check charging chute leakage. if it is then inform HOD.		Furnace IICHARGING CHUTES
1532021 Aug 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. it's ok. we fill some oil next time.
2. check solenoid valve working conditions and adjust oil pressure. it's ok.
3. check hydraulic line leakage. it's ok.		Furnace IHYDRAULIC POWER PACK NO. 1