| 15241 | 31 Aug 2020 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. greasing of bearings.grease is already there.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.BC 6, BC 5, AND BC 2 repairing is done.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.BC 2 COUPLING CHANGING NEXT TIME.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change. BC2 AND BC1 SIDE ROLLERS FITTING IS DONE.
| Other | RMHS CONVEYOR | |
| 15242 | 31 Aug 2020 | Scheduled Maintenance | WHEN WE CHACKING PUMP. WE FOUND THAT IT IS AIR LOCKED. WE REPAIRED IT NOW it's WORKING. | Other | GRANULATION TANK (FURNACE 2) | |
| 15243 | 31 Aug 2020 | Scheduled Maintenance | new vibro feeder with tray 2 nos assembly is done. | Other | RMHS VIBRO FEEDER | |
| 15244 | 29 Aug 2020 | Scheduled Maintenance | WASHING PLANT TILTING HOPPER, CONVEYOR NO 1, CRUSHER, VIBRATOR, ROLLER, DISCHARGE CONVEYOR , WATER PUMP
WASHING PLANT TILTING HOPPER, CONVEYOR NO 1, CRUSHER, VIBRATOR, ROLLER, DISCHARGE CONVEYOR , WATER PUMP
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. Check it is ok.
2. check panel board, clean, & tight all loose parts. Clean and tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly. It's ok.
5. check the high mast lights also.its ok | Other | WASHING PLANT | |
| 15245 | 29 Aug 2020 | Breakdown Maintenance | CRANE NO. 1 INTERNAL MOTOR BOLTS ARE LOOSE. WE OPEN IT AND TIGHT THE BOLTS. NOW ITS OK. | Other | TAPPING SEC. CRANE NO. 1 | |
| 15246 | 29 Aug 2020 | Breakdown Maintenance | furnace 1 old crane c.t and hoist new cable changed and ceiling rope also changed. | Furnace I | TAPPING SEC. CRANE NO. 1 | |
| 15247 | 29 Aug 2020 | Breakdown Maintenance | crane no.2 hoist motor connection given and threster oil filled | Other | TAPPING SEC. CRANE NO. 2 | |
| 15248 | 28 Aug 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 1
SEAL COOLING BLOWER 1,
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower. | Furnace I | ELECTRODE 1 | |
| 15249 | 28 Aug 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 2
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 2 | |
| 15250 | 28 Aug 2020 | Scheduled Maintenance | F1- ELECTRODE BLOWER 3
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
| Furnace I | ELECTRODE 3 | |
 white.png){kind=small}