Maintenance Report

Search Filter:

Showing 15,131-15,140 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1513111 Sep 2020Scheduled MaintenanceFURNACE 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.it is ok.
2. check panel board, clean, & tight all loose parts.clean and tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.its ok.		Furnace IIHYDRAULIC POWER PACK NO. 2
1513211 Sep 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color. its ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1513311 Sep 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color. its ok.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1513411 Sep 2020Scheduled Maintenance1.check transformer temp. and oil level.it is ok.
2. check transformer oil leakage.no oil leakage.
3. check crystal color. its silica gel is not ok. we change it when its coming.		Furnace IFURNACE 1 TRANSFORMER
1513511 Sep 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage.		Furnace ICHARGING CHUTES
1513611 Sep 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. it is ok. solenoid valves are in good condition.
2.check pneumatic cylinders and air supply lines.it is ok.
3. check charging chute leakage. if it is then inform HOD. no hole no leakage.		Furnace IICHARGING CHUTES
1513711 Sep 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. hydraulic tank level is ok. slipping side small amount of leakage.we change one cylinder.
2. check solenoid valve working conditions and adjust oil pressure. it's ok.
3. check hydraulic line leakage. we tight it. now its ok.		Furnace IHYDRAULIC POWER PACK NO. 1
1513811 Sep 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.level is ok. hoisting oil level is showing low. we open it and check and find that the cylinders are open so the oil level indicator showing low.
2. check solenoid valve working conditions and adjust oil pressure.its ok.
3. check hydraulic line leakage. small leakage in one cylinder. we tight next shutdown.		Furnace IIHYDRAULIC POWER PACK NO. 2
1513911 Sep 2020Scheduled Maintenance1. check the water manifold line, T section, and valves. some t section is not good. and some dummies also not in good condition.but its ok.
2. check leakage of hose pipes.it is ok.		Furnace IWATER MAINEFOLD
1514011 Sep 2020Scheduled Maintenance1. check the water manifold line, T section, and valves. some t section is not good. and some dummies also not in good condition.2 valve are damaged.
2. check leakage of hose pipes.it is ok.		Furnace IIWATER MAINEFOLD