| 14951 | 01 Oct 2020 | Scheduled Maintenance | POLLUTION ID FANS FOR F2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. motor condition checked. it is ok.
2. check panel board, clean, & tight all loose parts. clean and tight all loose parts.
3. all parts clean by hand blower.
4. MOTOR GREASING.
| Other | POLLUTION 2 | |
| 14952 | 01 Oct 2020 | Breakdown Maintenance | its cable is a short circuit. we repaired it. now its ok. | Other | TAPPING SEC. CRANE NO. 2 | |
| 14953 | 01 Oct 2020 | Breakdown Maintenance | washing plant crusher contact change. | Other | CRUSHER ( WASHING PLANT) | |
| 14954 | 01 Oct 2020 | Scheduled Maintenance | a cooling fan at deck side fitting is done | Furnace I | COOLING FAN | |
| 14955 | 01 Oct 2020 | Scheduled Maintenance | a cooling fan fitting at the deck side. | Furnace II | COOLING FAN | |
| 14956 | 01 Oct 2020 | Scheduled Maintenance | motor open, clean, and bearing side grease putting is done. its bearing cover bolt changed. | Other | cooling blower spare | |
| 14957 | 01 Oct 2020 | Breakdown Maintenance | It's break has a problem. We repaired it 2 times. Now its ok. | Other | TAPPING SEC. CRANE NO. 2 | |
| 14958 | 01 Oct 2020 | Scheduled Maintenance | ITS PROTECTION SHIELD IS DAMAGED. WE NEED TO CHANGE IT URGENTLY. its fabrication work is complete. we take shutdown to fit it. | Furnace I | PROTECTION SHIELD | |
| 14959 | 30 Sep 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
its motor has a problem. so we open it. motor repaired and fixed. now crane working.
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 1 | |
| 14960 | 30 Sep 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
its motor has a
problem. we open it for checking.motor open and repaired. now its working.
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
| Other | CHIPPING YARD CRANE NO. 1 | |
 white.png){kind=small}