| 14901 | 03 Oct 2020 | Breakdown Maintenance | it's bearing and shaft damage. we open it and changed. its fitting work is in progress.
WE CHANGED BEARING WITH REPAIRING SHAFT ON LATHE. NOW ITS OK. | Other | VIBRATOR SCREEN MACHINE ( WASHING PLANT) | |
| 14902 | 03 Oct 2020 | Scheduled Maintenance | it's bearing and shaft damage. we open it and changed. its fitting work is done. now it's ok. | Other | VIBRATOR SCREEN MACHINE ( WASHING PLANT) | |
| 14903 | 03 Oct 2020 | Scheduled Maintenance | its maintenance was not done because of furnace shutdown.
TILTING HOPPER
1. greasing all bushes.
2.hydraulic pump and motor coupling.
3. checking the hydraulic oil level and if not then fill.
4. check hopper welding sections.
CONVEYOR NO 1
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change.
CRUSHER
1. check the crusher foundation.
2. check V belts condition.
3. do greasing.
4. check spring rod condition and gap between plates.
VIBRATOR
1. check the spring condition.
2. check V belts condition.
3. check vibrations if not good then adjust.
4. check the frame welding condition.
ROLLER
1. check roller speed.
2.greasing of bearings.
3.gearbox oil level check and if not then fill as per requirement.
4. check coupling and key ( if damaged than inform and change) and do the greasing.
5. check the drum condition.
6. check the mounting frame welding condition.
DISCHARGE CONVEYOR
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change. | Other | WASHING PLANT | |
| 14904 | 03 Oct 2020 | Scheduled Shutdown | its maintenance is not done because of furnace is shutdown.
WASHING PLANT TILTING HOPPER, CONVEYOR NO 1, CRUSHER, VIBRATOR, ROLLER, DISCHARGE CONVEYOR , WATER PUMP
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
5. check the high mast lights also. | Other | WASHING PLANT | |
| 14905 | 03 Oct 2020 | Scheduled Shutdown | shutdown
Day 1
we open all electrode seal boxes and rope.
we also open the electrode cooling seal rope.
| Furnace I | FURNACE 1 | |
| 14906 | 03 Oct 2020 | Scheduled Shutdown | its water manifold side one pipe damged. we repaired it. | Furnace II | WATER MAINEFOLD | |
| 14907 | 03 Oct 2020 | Breakdown Maintenance | its H.T. motor removing and its repairing work is in progress. | Other | TAPPING SEC. CRANE NO. 1 | |
| 14908 | 03 Oct 2020 | Breakdown Maintenance | it's H.T. motor removing.
TODAY WE OPEN ITS CRANE AND KEEP TO WORKSHOP SIDE.
We fit one hinch crane to replace it.
now its ok. | Other | TAPPING SEC. CRANE NO. 1 | |
| 14909 | 03 Oct 2020 | Scheduled Maintenance | all cleaning, checking, and adjusting alignment. now it's running normal. | Other | RMHS VIBRO FEEDER | |
| 14910 | 03 Oct 2020 | Scheduled Maintenance | clean, blowing and emergency switch with siren fixed. now it's ok. | Other | TAPPING SEC. CRANE NO. 1 | |
 white.png){kind=small}