Maintenance Report

Search Filter:

Showing 14,691-14,700 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1469130 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD.		Furnace IELECTRODE 1
1469229 Oct 2020Breakdown MaintenanceIt's L.T. side gear bearing is bolts are loose. We tight it now it's ok.OtherTAPPING SEC. CRANE NO. 1
1469329 Oct 2020Breakdown MaintenanceIt's coupling bolts are loose. We tight it. Now it's ok.Other RMHS SHUTTLE CONVEYOR ( BELT CONVEYOR NO. 2)
1469429 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
CHIPPING YARD E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.

OtherCHIPPING YARD CRANE NO. 1
1469529 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
CHIPPING YARD E.O.T. CRANE 2

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.

OtherCHIPPING YARD CRANE NO. 2
1469629 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication.
2. checking frames welding condition.
3. checking cotter pin and its failure condition.

OtherTELPHER (FURNACE 1)
1469729 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
TELPHER FOR F2

1. checking the bearing, rollers condition and do lubrication.
2. checking frames welding condition.
3. checking cotter pin and its failure condition.

OtherTELPHER ( FURNACE 2)
1469829 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
POLLUTION ID FANS (Furnace 1)
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation.
3. check v belts condition and inform if its on critical stage.
4. check foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
OtherPOLLUTION 1
1469929 Oct 2020Scheduled MaintenanceNO MAINTENANCE BECAUSE OF FURNACE 1 POLLUTION SIDE WORKING.
POLLUTION ID FANS FOR (Furnace 2)
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation.
3. check v belts condition and inform if its on critical stage.
4. check foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
OtherPOLLUTION 2
1470029 Oct 2020Scheduled MaintenanceCHIPPING YARD E.O.T. CRANE 1

LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.

HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
OtherCHIPPING YARD CRANE NO. 1