| 14621 | 06 Nov 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition.ITS OK.
2.check pneumatic cylinders and air supply line.
3. check charging chute lekage. if it is than inform HOD. | Furnace II | CHARGING CHUTES | |
| 14622 | 06 Nov 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank. ITS OK. WE OPEN TANK WE FILL NEXT TIME OIL.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 14623 | 06 Nov 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank. ITS OK.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 14624 | 05 Nov 2020 | Breakdown Shutdown | It's electrode 3 has a sparking problem. When we checking we found that it's bolt C3 clamp bolt is damage. We mount one new bolt there. Now it's ok. | Furnace II | ELECTRODE 3 | |
| 14625 | 05 Nov 2020 | Breakdown Maintenance | Its Charing chute no. 3 AND 4 no opening. Because of material stuck on it. We hammering on chute pipe line. Than its opening. Now it's ok. | Furnace I | CHARGING CHUTES | |
| 14626 | 05 Nov 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 1 | |
| 14627 | 05 Nov 2020 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. greasing is done. it is ok.
2. check the gearbox oil level, leakage, and fill if required. no leakage but we fill grease.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions. it is ok.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. greasing is done. it is ok.
2. check the gearbox oil level, leakage, and fill if required. no leakage but we fill grease.
3. check all fasteners and mounting bolts. it is ok.
4. check frame welding conditions. it is ok.
5. check end traveling gears condition and do the greasing.it is ok. greasing is done.
HT.
1. check rope drum, hook, rope condition. greasing of rope. greasing is done. we found that it is damage. we open and repaired.
2. check the thruster drum condition and its brake tightness. no thruster.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions.it is ok. | Other | CHIPPING YARD CRANE NO. 2 | |
| 14628 | 05 Nov 2020 | Scheduled Maintenance | TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication. checked it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition. it is ok.
| Other | TELPHER (FURNACE 1) | |
| 14629 | 05 Nov 2020 | Scheduled Maintenance | TELPHER FOR F2
TELPHER FOR F1
1. checking the bearing, rollers condition, and do lubrication. checked it is ok.
2. checking frames welding condition.it is ok.
3. checking cotter pin and its failure condition. it is ok.
| Other | TELPHER ( FURNACE 2) | |
| 14630 | 05 Nov 2020 | Scheduled Maintenance | POLLUTION ID FANS (Furnace 1) ITS RUNNING SO WE NOT DOING ITS MAINTENANCE.
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation.
3. check v belts condition and inform if its on critical stage.
4. check foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
| Other | POLLUTION 1 | |
 white.png){kind=small}