| 14421 | 27 Nov 2020 | Scheduled Maintenance | ELECTRODE BLOWER 3
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower. | Furnace II | ELECTRODE 3 | |
| 14422 | 27 Nov 2020 | Scheduled Maintenance | FURNACE 2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. | Furnace II | HYDRAULIC POWER PACK NO. 1 | |
| 14423 | 27 Nov 2020 | Scheduled Maintenance | FURNACE 2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
| 14424 | 27 Nov 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.
2. check transformer oil leakage.
3. check crystal color. | Furnace II | FURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR) | |
| 14425 | 27 Nov 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors. | Furnace II | FURNACE 2 TRANSFORMER NO. 2 | |
| 14426 | 27 Nov 2020 | Scheduled Maintenance | 1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors. | Furnace I | FURNACE 1 TRANSFORMER | |
| 14427 | 27 Nov 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition.its ok.
2.check pneumatic cylinders and air supply line. It's ok.
3. check charging chute lekage. if it is than inform HOD. | Furnace I | CHARGING CHUTES | |
| 14428 | 27 Nov 2020 | Scheduled Maintenance | 1.check solenoid valve condition and its pipe condition. its ok.
2.check pneumatic cylinders and air supply line. its ok.
3. check charging chute lekage. if it is than inform HOD. | Furnace II | CHARGING CHUTES | |
| 14429 | 27 Nov 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank. ITS OK. WE OPEN TANK WE FILL NEXT TIME OIL.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage. | Furnace I | HYDRAULIC POWER PACK NO. 1 | |
| 14430 | 27 Nov 2020 | Scheduled Maintenance | 1. checking loose parts and check the hydraulic oil level in the tank. ITS OK. WE OPEN TANK WE FILL NEXT TIME OIL.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage. | Furnace II | HYDRAULIC POWER PACK NO. 2 | |
 white.png){kind=small}