Maintenance Report

Search Filter:

Showing 14,361-14,370 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1436104 Dec 2020Scheduled MaintenanceELECTRODE BLOWER 2

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 2
1436204 Dec 2020Scheduled Maintenance ELECTRODE BLOWER 3

1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.		Furnace IIELECTRODE 3
1436304 Dec 2020Scheduled MaintenanceFURNACE 2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.		Furnace IIHYDRAULIC POWER PACK NO. 1
1436404 Dec 2020Scheduled MaintenanceFURNACE 2

1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.		Furnace IIHYDRAULIC POWER PACK NO. 2
1436504 Dec 2020Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil leakage.
3. check crystal color.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1436604 Dec 2020Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1436704 Dec 2020Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors.		Furnace IFURNACE 1 TRANSFORMER
1436804 Dec 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition.
2.check pneumatic cylinders and air supply line.
3. check charging chute lekage. if it is than inform HOD.		Furnace ICHARGING CHUTES
1436904 Dec 2020Scheduled Maintenance1.check solenoid valve condition and its pipe condition. its ok.
2.check pneumatic cylinders and air supply line.
3. check charging chute lekage. if it is than inform HOD.		Furnace IICHARGING CHUTES
1437004 Dec 2020Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank. it's ok. some hydraulic has small lekage.
2. check solenoid valve working conditions and adjust oil pressure. its ok.
3. check hydraulic line leakage.		Furnace IHYDRAULIC POWER PACK NO. 1