| 14221 | 23 Dec 2020 | Scheduled Maintenance | 3RD FLOOR CARBON PASTE LIFTING CRANE
LT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
CT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
HT.
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
| Other | CARBON PASTE LIFTING CRANE | |
| 14222 | 22 Dec 2020 | Breakdown Maintenance | It's one side Plummer block no. SN 516 foundation is broken. but we fix it with plates.
we will change it. conveyor is running. We replaced it. Now its ok. | Other | RMHS BELT CONVEYOR NO.1 | |
| 14223 | 22 Dec 2020 | Scheduled Maintenance | WATER CIRCULATION PUMP 1,2,3,
It's ok.
FURNACE 1
GRANULATION PUMP 1,2
It's ok. Working normally.
SUBMERSIBLE PUMP 1,2,
We removed pump no. 1
POLLUTION WATER PUMP NO 1
FURNACE 2
GRANULATION PUMP 1,2,
It's ok.
POLLUTION WATER PUMP NO 1,
OFFICE SUBMERSIBLE PUMP 1,
WASHING PLANT SUBMERSIBLE PUMP 1
It's damaged.
1. check the pump condition and check discharge.
2. check coupling condition, alignment, and do greasing.
3. check pipelines and valve's condition.
4. check cooling towers nozzles condition.
It's ok. | Other | PUMP | |
| 14224 | 22 Dec 2020 | Scheduled Maintenance | F1- GRANULATION MOTOR 1,2 WATER CIRCULATION PUMP MOTOR 1,2,3, SUBMERSIBLE PUMP MOTOR 1 cable is cut due to the supporting rope has broken ,2, POLLUTION WATER PUMP MOTOR
NO 1
F2- GRANULATION MOTOR 1,2, POLLUTION WATER PUMP MOTOR NO 1, OFFICE SUBMERSIBLE PUMP MOTOR 1,
WASHING PLANT SUBMERSIBLE PUMP MOTOR1
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. water circulation pump motor greasing.
| Other | PUMP | |
| 14225 | 22 Dec 2020 | Breakdown Maintenance | It's belt is damaged. We repaired it with cemant and conveyor piece. Also we changing one side of Plummer block NO. SNU 516.
WE ALSO DRUM SIDE GEAR COPLING NO. 104
AND MOTOR SIDE GEAR COUPLING 102. | Other | RMHS BELT CONVEYOR NO.1 | |
| 14226 | 22 Dec 2020 | Breakdown Maintenance | We changing some rollers and repair the belt. Now it's ok. | Other | RMHS SHUTTLE CONVEYOR ( BELT CONVEYOR NO. 2) | |
| 14227 | 21 Dec 2020 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
| Other | RMHS CONVEYOR | |
| 14228 | 21 Dec 2020 | Scheduled Maintenance | ALL VIBRATORS
check Vibro feeders coil connection, its condition and ensure its working properly with adjusting its vibrations. | Other | RMHS VIBRO FEEDER | |
| 14229 | 21 Dec 2020 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed. Belt damaged.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing. ITS OK.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change. Some roller changed FORM BC1.
| Other | RMHS CONVEYOR | |
| 14230 | 21 Dec 2020 | Breakdown Maintenance | It's conveyor joint coming out. We fix it with cement. | Other | RMHS BELT CONVEYOR NO.3 | |
 white.png){kind=small}