| 14021 | 15 Jan 2021 | Scheduled Maintenance | Its ok.
1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD. | Furnace I | ELECTRODE 1 | |
| 14022 | 15 Jan 2021 | Breakdown Maintenance | It's chute plate and rubber coming out. we repaired it. Now it's ok | Other | RMHS BELT CONVEYOR NO.6 | |
| 14023 | 15 Jan 2021 | Breakdown Maintenance | It's pollution gate is closed. We open it and smoke going by chimney. | Other | POLLUTION 1, ID FAN NO. 1 | |
| 14024 | 15 Jan 2021 | Breakdown Maintenance | It's motor is burn. We replace it with new one. 10 hp And 1440 rpm. | Other | RMHS BELT CONVEYOR NO.6 | |
| 14025 | 14 Jan 2021 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
Greasing is done.
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 1 | |
| 14026 | 14 Jan 2021 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
Greasing done
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 2 | |
| 14027 | 14 Jan 2021 | Scheduled Maintenance | TELPHER FOR F1
It's ok. Running normal.
1. checking the bearing, rollers condition, and do lubrication.
2. checking frames welding condition.
3. checking cotter pin and its failure condition.
| Other | TELPHER (FURNACE 1) | |
| 14028 | 14 Jan 2021 | Scheduled Maintenance | TELPHER FOR F2
Its ok.
1. checking the bearing, rollers condition and do lubrication.
2. checking frames welding condition.
3. checking cotter pin and its failure condition.
| Other | TELPHER ( FURNACE 2) | |
| 14029 | 14 Jan 2021 | Scheduled Maintenance | POLLUTION ID FANS (Furnace 1)
It's running.
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation.
3. check v belts condition and inform if its on critical stage.
4. check foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
| Other | POLLUTION 1 | |
| 14030 | 14 Jan 2021 | Scheduled Maintenance | POLLUTION ID FANS FOR (Furnace 2)
It's running.
1. open cover and clean dust.
2. check the balancing of impeller and vibration isolation.
3. check v belts condition and inform if its on critical stage.
4. check foundation bolts and nuts of Plummer blocks.
5. greasing the Plummer blocks.
6. check the duct condition and remove dust from the duct.
7. check stack condition and check its temperature.
| Other | POLLUTION 2 | |
 white.png){kind=small}