Maintenance Report

Search Filter:

Showing 13,721-13,730 of 17,159 items.

#DateTypeDetailsFurnaceEquipmentActions
1372119 Feb 2021Scheduled MaintenanceFURNACE 2
1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.		Furnace IIHYDRAULIC POWER PACK NO. 1
1372219 Feb 2021Scheduled MaintenanceFURNACE 2

1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check solenoid valves.		Furnace IIHYDRAULIC POWER PACK NO. 2
1372319 Feb 2021Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil leakage.
3. check crystal color.		Furnace IIFURNACE 2 TRANSFORMER NO. 1 ( GROUND FLOOR)
1372419 Feb 2021Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors.		Furnace IIFURNACE 2 TRANSFORMER NO. 2
1372519 Feb 2021Scheduled Maintenance1.check transformer temp. and oil level.
2. check transformer oil lekage.
3.check crystal colors.		Furnace IFURNACE 1 TRANSFORMER
1372619 Feb 2021Scheduled Maintenance1.check solenoid valve condition and its pipe condition.
2.check pneumatic cylinders and air supply line.
3. check charging chute lekage. if it is than inform HOD.		Furnace ICHARGING CHUTES
1372719 Feb 2021Scheduled Maintenance1.check solenoid valve condition and its pipe condition.
2.check pneumatic cylinders and air supply line.
3. check charging chute lekage. if it is than inform HOD.		Furnace IICHARGING CHUTES
1372819 Feb 2021Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage.		Furnace IHYDRAULIC POWER PACK NO. 1
1372919 Feb 2021Scheduled Maintenance1. checking loose parts and check the hydraulic oil level in the tank.
2. check solenoid valve working conditions and adjust oil pressure.
3. check hydraulic line leakage.		Furnace IIHYDRAULIC POWER PACK NO. 2
1373019 Feb 2021Scheduled Maintenance1. check the water manifold line, T section, and valves.
2. check leakage of hose pipes.		Furnace IWATER MAINEFOLD