| 13621 | 05 Mar 2021 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD. | Furnace I | ELECTRODE 3 | |
| 13622 | 05 Mar 2021 | Scheduled Maintenance | 1. by air pipe clean dust from all cylinders.
2. check leakage of hydraulic oil. if it is then informed to HOD. | Furnace I | ELECTRODE 1 | |
| 13623 | 05 Mar 2021 | Breakdown Maintenance | It's belt joint is coming out. We use conveyor solution and repair it. Now it's ok. | Other | RMHS BELT CONVEYOR NO.6 | |
| 13624 | 05 Mar 2021 | Breakdown Maintenance | It's joint is damaged. We repaired it using a new patch on top. Now it's ok. | Other | RMHS BELT CONVEYOR NO.5 | |
| 13625 | 05 Mar 2021 | Breakdown Maintenance | Its cover is fully damage. Its pipe lines are coming out. We joint pipe line and repairing cover. Now its ok. | Other | COMPRESSOR | |
| 13626 | 05 Mar 2021 | Breakdown Maintenance | It's shaft is broken. We open and it's repairing work on lathe is in progress.
its gear is broken wwe close this project
| Other | cock crusher | |
| 13627 | 05 Mar 2021 | Breakdown Maintenance | It's tap hole side we fitting 10.mm plate for support and 1 mm sheet for making farma. | Furnace I | FURNACE 1 | |
| 13628 | 05 Mar 2021 | Breakdown Maintenance | It's motor terminal box is damaged. We removing motor and giving electrical dept. To repairing after some time they give us motor. We fitted it now it running normal. | Furnace II | TELPHER F2 (SPARE) | |
| 13629 | 04 Mar 2021 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 1
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 1 | |
| 13630 | 04 Mar 2021 | Scheduled Maintenance | CHIPPING YARD E.O.T. CRANE 2
LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.
2. check the gearbox oil level, leakage, and fill if required.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
5. check end traveling gears condition and do the greasing.
HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
| Other | CHIPPING YARD CRANE NO. 2 | |
 white.png){kind=small}