| 11871 | 24 Oct 2021 | Breakdown Shutdown | its electrode 3 is broken. we remove it by chain block and start the furnace. | Furnace II | ELECTRODE 3 | |
| 11872 | 24 Oct 2021 | Breakdown Shutdown | its electrode 1 is broken. we remove it by chain broken. now it ok. | Furnace II | ELECTRODE 1 | |
| 11873 | 24 Oct 2021 | Breakdown Maintenance | ITS BELT fasteners coming out. REPAIRING Is done. | Other | RMHS BELT CONVEYOR NO.6 | |
| 11874 | 23 Oct 2021 | Breakdown Maintenance | It's crusher plate is finish. We remove it to fill welding on plate. Welding ois finish. we fit it. mow its ok. | Other | cock crusher | |
| 11875 | 23 Oct 2021 | Scheduled Maintenance | TILTING HOPPER
1. greasing all bushes.
2.hydraulic pump and motor coupling.
3. checking the hydraulic oil level and if not then fill.
4. check hopper welding sections.
CONVEYOR NO 1
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change.
CRUSHER
1. check the crusher foundation.
2. check V belts condition.
3. do greasing.
4. check spring rod condition and gap between plates.
VIBRATOR
1. check the spring condition.
2. check V belts condition.
3. check vibrations if not good then adjust.
4. check the frame welding condition.
ROLLER
1. check roller speed.
2.greasing of bearings.
3.gearbox oil level check and if not then fill as per requirement.
4. check coupling and key ( if damaged than inform and change) and do the greasing.
5. check the drum condition.
6. check the mounting frame welding condition.
DISCHARGE CONVEYOR
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change. | Other | WASHING PLANT | |
| 11876 | 23 Oct 2021 | Scheduled Maintenance | WASHING PLANT TILTING HOPPER, CONVEYOR NO 1, CRUSHER, VIBRATOR, ROLLER, DISCHARGE CONVEYOR , WATER PUMP
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
5. check the high mast lights also. | Other | WASHING PLANT | |
| 11877 | 23 Oct 2021 | Breakdown Shutdown | its electrode 3 side hood have heavy water leakage. we welded it also we put clay and paste to c3,c4,c5,c6 clamps. | Furnace II | ELECTRODE 3 | |
| 11878 | 23 Oct 2021 | Breakdown Maintenance | ITS BELT fasteners coming out.REPAIRING Is done. | Other | RMHS BELT CONVEYOR NO.6 | |
| 11879 | 23 Oct 2021 | Breakdown Maintenance | ITS BELT fasteners coming out.REPAIRING Is done. | Other | RMHS BELT CONVEYOR NO.6 | |
| 11880 | 23 Oct 2021 | Breakdown Maintenance | ITS BELT fasteners coming out.REPAIRING Is done. | Other | RMHS BELT CONVEYOR NO.6 | |
 white.png){kind=small}