| 11861 | 26 Oct 2021 | Breakdown Maintenance | its adjustment bolts is broken. we repair it and fix. | Other | Slag crusher | |
| 11862 | 25 Oct 2021 | Other | Febrication of Mesh for cock screeningworK IS FINISH. | Other | cock crusher | |
| 11863 | 25 Oct 2021 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform.
2. check panel board, clean, & tight all loose parts.
3. all parts clean by hand blower.
4. check limit switches and its condition. ensure that all limit switches and wires working properly.
| Other | RMHS CONVEYOR | |
| 11864 | 25 Oct 2021 | Scheduled Maintenance | ALL VIBRATORS
check Vibro feeders coil connection, its condition and ensure its working properly with adjusting its vibrations. | Other | RMHS VIBRO FEEDER | |
| 11865 | 25 Oct 2021 | Scheduled Maintenance | ALL CONVEYORS
BC 1, BC 2, BC 3, BC 4, BC 5, BC 6, BC 7
1. greasing of bearings.
2. lubrication of rollers and check conditions.
3. check belt status ( if damaged than inform and change) and also check tightness, speed.
4. gearbox oil level check and if not then fill as per requirement.
5. check coupling and key ( if damaged than inform and change) and do the greasing.
6. check the drum condition.
7. check mounting frame welding condition.
8. check rollers condition and if not good then change.
| Other | RMHS CONVEYOR | |
| 11866 | 25 Oct 2021 | Breakdown Maintenance | ITS BELT fasteners coming out.REPAIRING Is done. | Other | RMHS BELT CONVEYOR NO.6 | |
| 11867 | 25 Oct 2021 | Breakdown Maintenance | its adjustment bolts are damaged. we replace it with new one. | Other | CRUSHER ( WASHING PLANT) | |
| 11868 | 25 Oct 2021 | Breakdown Maintenance | its adjustment bolts are damaged. we replace it with new one. | Other | CRUSHER ( WASHING PLANT) | |
| 11869 | 25 Oct 2021 | Breakdown Maintenance | its adjustment bolts are damaged. we replace it with new one. | Other | CRUSHER ( WASHING PLANT) | |
| 11870 | 24 Oct 2021 | Breakdown Shutdown | its electrode 3 is broken. we remove it by chain block and start the furnace. | Furnace II | ELECTRODE 3 | |
 white.png){kind=small}