Maintenance Report

Search Filter:

Showing 10,291-10,300 of 17,159 items.

#	Date	Type	Details	Furnace	Equipment	Actions
#						Actions
10291	19 May 2022	Scheduled Maintenance	CHIPPING YARD E.O.T. CRANE 1 LT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. 2. check the gearbox oil level, leakage, and fill if required. 3. check all fasteners and mounting bolts. 4. check frame welding conditions. 5. check end traveling gears condition and do the greasing. CT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. 2. check the gearbox oil level, leakage, and fill if required. 3. check all fasteners and mounting bolts. 4. check frame welding conditions. 5. check end traveling gears condition and do the greasing. HT. 1. check rope drum, hook, rope condition. greasing of rope. 2. check the thruster drum condition and its brake tightness. 3. check all fasteners and mounting bolts. 4. check frame welding conditions.	Other	CHIPPING YARD CRANE NO. 1
10292	19 May 2022	Scheduled Maintenance	CHIPPING YARD E.O.T. CRANE 2 LT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. 2. check the gearbox oil level, leakage, and fill if required. 3. check all fasteners and mounting bolts. 4. check frame welding conditions. 5. check end traveling gears condition and do the greasing. CT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. 2. check the gearbox oil level, leakage, and fill if required. 3. check all fasteners and mounting bolts. 4. check frame welding conditions. 5. check end traveling gears condition and do the greasing. HT. 1. check rope drum, hook, rope condition. greasing of rope. 2. check the thruster drum condition and its brake tightness. 3. check all fasteners and mounting bolts. 4. check frame welding conditions.	Other	CHIPPING YARD CRANE NO. 2
10293	19 May 2022	Scheduled Maintenance	TELPHER FOR F1 1. checking the bearing, rollers condition, and do lubrication. 2. checking frames welding condition. 3. checking cotter pin and its failure condition.	Other	TELPHER (FURNACE 1)
10294	19 May 2022	Scheduled Maintenance	TELPHER FOR F2 1. checking the bearing, rollers condition and do lubrication. 2. checking frames welding condition. 3. checking cotter pin and its failure condition.	Other	TELPHER ( FURNACE 2)
10295	19 May 2022	Scheduled Maintenance	POLLUTION ID FANS (Furnace 1) 1. open cover and clean dust. 2. check the balancing of impeller and vibration isolation. 3. check v belts condition and inform if its on critical stage. 4. check foundation bolts and nuts of Plummer blocks. 5. greasing the Plummer blocks. 6. check the duct condition and remove dust from the duct. 7. check stack condition and check its temperature.	Other	POLLUTION 1
10296	19 May 2022	Scheduled Maintenance	POLLUTION ID FANS FOR (Furnace 2) 1. open cover and clean dust. 2. check the balancing of impeller and vibration isolation. 3. check v belts condition and inform if its on critical stage. 4. check foundation bolts and nuts of Plummer blocks. 5. greasing the Plummer blocks. 6. check the duct condition and remove dust from the duct. 7. check stack condition and check its temperature.	Other	POLLUTION 2
10297	19 May 2022	Scheduled Maintenance	CHIPPING YARD E.O.T. CRANE 1 LT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly. CT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly. HT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly.	Other	CHIPPING YARD CRANE NO. 1
10298	19 May 2022	Scheduled Maintenance	CHIPPING YARD E.O.T. CRANE 2 LT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly. CT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly. HT. 1. check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower. 4. check limit switches and its condition. ensure that all limit switches and wires working properly.	Other	CHIPPING YARD CRANE NO. 2
10299	19 May 2022	Scheduled Maintenance	TELPHER FOR F1 1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower.	Other	TELPHER (FURNACE 1)
10300	19 May 2022	Scheduled Maintenance	TELPHER FOR F2 1.check motor condition ( amp, volt, and connectivity) if the noise coming than inform. 2. check panel board, clean, & tight all loose parts. 3. all parts clean by hand blower.	Other	TELPHER ( FURNACE 2)