Maintenance Details

Back

Date06 May 2020
Start Time07:30:40
End Time12:30:40
Nature Of MaintenanceMechanical
EquipmentTAPPING SEC. CRANE NO. 2
Type of MaintenanceScheduled Maintenance
DetailsTAPPING SECTION E.O.T. CRANE 2

LT.
1. checked coupling, shaft, and pedestal bearing condition and do the greasing. we greasing all couplings.
2. checked the gearbox oil level it is ok. no leakage.
3. checked all fasteners and mounting bolts. we found that 3 bolt of gearbox foundation is not there. so we mount it. now it's ok.
4. checked frame welding conditions.it is ok.
5. checked end traveling gears condition. it is ok. and greasing is done.

CT.
1. checked coupling, shaft, and pedestal bearing condition and greasing done.
2. check the gearbox oil level. there is leakage in the gearbox. so we put some grease.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition. it is ok. greasing is done.

HT.
1. check rope drum, hook, rope condition.it is ok. The greasing of wire rope is done.
2. check the thruster drum condition and its brake tightness. it is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. it is ok.
Remark(not set)
FurnaceOther
StatusCompleted