Maintenance Details

Back

Date11 Nov 2020
Start Time12:10:30
End Time12:10:30
Nature Of MaintenanceMechanical
EquipmentTAPPING SEC. CRANE NO. 2
Type of MaintenanceScheduled Maintenance
DetailsTAPPING SECTION E.O.T. CRANE 2

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. Checking and gresing is done. It is ok.
2. check the gearbox oil level, leakage, and fill if required. No leakage but we fill grese.
3. check all fasteners and mounting bolts. It is OK.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. It is ok.
2. check the gearbox oil level, leakage, and fill if required. Leakage is there so we fill grease.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
5. check end traveling gears condition and do the greasing. It is ok. And greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope. It is ok.
2. check the thruster drum condition and its brake tightness. It is ok.
3. check all fasteners and mounting bolts. It is ok.
4. check frame welding conditions. It is ok.
Remark
FurnaceOther
StatusCompleted