 white.png){kind=small}
Maintenance Details
| Date | 12 Aug 2020 |
|---|---|
| Start Time | 15:30:01 |
| End Time | 16:30:01 |
| Nature Of Maintenance | Mechanical |
| Equipment | TAPPING SEC. CRANE NO. 3 |
| Type of Maintenance | Scheduled Maintenance |
| Details | TAPPING SECTION E.O.T. CRANE 3 LT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. check bearing condition it is ok. And greasing is done.one coupling has no bolt we fix it. 2. check the gearbox oil level, leakage, and fill if required. leakage we fill some grease. 3. check all fasteners and mounting bolts.it is ok. 4. check frame welding conditions. It is ok. 5. check end traveling gears condition and do the greasing. It is ok.greasing is done. 6. motor side and gearbox side foundation bolts tights. CT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. Greasing is done. 2. check the gearbox oil level, leakage, and fill if required. It has leakage but we fill some grease. 3. check all fasteners and mounting bolts.it is ok. 4. check frame welding conditions. It is ok. 5. check end traveling gears condition and do the greasing. It is ok. HT. 1. check rope drum, hook, rope condition. greasing of rope. It is ok. Greasing is done. 2. check all fasteners and mounting bolts. It is ok. 3. check frame welding conditions. It is ok. 4. gearbox side grease filling because of noise coming. |
| Remark | |
| Furnace | Other |
| Status | Completed |