Maintenance Details

Back

Date01 Jul 2020
Start Time13:30:01
End Time15:30:01
Nature Of MaintenanceMechanical
EquipmentTAPPING SEC. CRANE NO. 3
Type of MaintenanceScheduled Maintenance
DetailsTAPPING SECTION E.O.T. CRANE 3

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. coupling greasing is done.
2. check the gearbox oil level, leakage, and fill if required. gearbox has leakage. we fill grease.
3. check all fasteners and mounting bolts. gearbox side and 2 coupling side bolt fitting is done.
4. check frame welding conditions. its ok.
5. check end traveling gears condition and do the greasing.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing.greasing of cooling is done.
2. check the gearbox oil level, leakage, and fill if required. gearbox side small amount of grease filling is done.
3. check all fasteners and mounting bolts.its ok.
4. check frame welding conditions.it ok.
5. check end traveling gears condition and do the greasing.greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.
2. check the thruster drum condition and its brake tightness. gearbox make noise so we fill grease.
3. check all fasteners and mounting bolts.
4. check frame welding conditions.
Remark
FurnaceOther
StatusCompleted