 white.png){kind=small}
Maintenance Details
| Date | 25 Jun 2020 |
|---|---|
| Start Time | 10:00:00 |
| End Time | 11:30:01 |
| Nature Of Maintenance | Mechanical |
| Equipment | TAPPING SEC. CRANE NO. 3 |
| Type of Maintenance | Scheduled Maintenance |
| Details | TAPPING SECTION E.O.T. CRANE 3 LT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. Checking and greasing are done. It is ok. 2. check the gearbox oil level, leakage, and fill if required. No leakage but we fill grease. 3. check all fasteners and mounting bolts. It is OK. 4. check frame welding conditions. It is ok. 5. check end traveling gears condition and do the greasing. It is ok. CT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing. It is ok. 2. check the gearbox oil level, leakage, and fill if required. Leakage is there so we fill grease. 3. check all fasteners and mounting bolts. It is ok. 4. check frame welding conditions. It is ok. 5. check end traveling gears condition and do the greasing. It is ok. And greasing is done. HT. 1. check rope drum, hook, rope condition. greasing of rope. It is ok. 2. check the thruster drum condition and its brake tightness. It is ok. 3. check all fasteners and mounting bolts. It is ok. 4. check frame welding conditions. It is ok. 5. gearbox is leakage and makes too much sound so we put grease. |
| Remark | |
| Furnace | Other |
| Status | Completed |